Only show results available in Virginia? Ok

liquid monitoring Applications

  • Premium

    Measurement solution for liquid TiCl4 vanadium oxychloride monitor

    The chloride process of titanium dioxide (TiO2) pigment manufacture first converts titania-containing ores to TiCl4 via a carbochlorination reaction at a high temperature in a chlorinator in the presence of chlorine gas and petroleum coke added as a reductant.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Moisture Monitoring for Liquid Benzene Feed Stock

    Moisture needs to be measured in feed stock gases in the manufacture of polymers . For example, pre-dried benzene is fed in to a reactor containing hydrochloric acid – if the dryers are not operating properly moisture in the benzene promotes acid corrosion of the reactor and process lines. Several processes require water concentrations of specific values to optimise efficiency and yield; in such cases more sophisticated instruments are required.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Liquid Chromatography for soil consultancy

    Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Premium

    Gas analysis & monitoring system for emission monitoring

    From the environmental point of view, an issue is any solid, liquid or gaseous substance introduced into the atmosphere that can cause air pollution. Given the wide variety of substances present in the atmosphere, have been proposed several methods of classification: Primary pollutants can be of gaseous or particulate.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • NDIR Solutions

    We propose our product as a new powerful base for optical absorption analysis. One of the greatest advantages of this method is that virtually any sample in virtually any state may be studied. Liquids, gases, films, powders, surfaces can all be examined with a proper choice of sampling technique. Using LED-PD optopairs for mid-infrared spectral range allows developing portable sensors with high reliability and adequate accuracy that can be successfully applied in different areas for matter analysis purposes.

    By LED Microsensor NT based in Saint-Petersburg, RUSSIA.

  • Laboratory Ion Analyses

    Our single ion and multi ion kits allow for real-time laboratory analysis of one to six ions simultaneously with one probe. These ion sensors along with the reference electrode are solid state which allows for easy handling, storage and maintenance. No filling solutions nor buffers are required. The sensors are based on carbon nanotube technology allowing for reliable and reproducible measurement of ions in liquids.

    By CleanGrow based in Blackpool, IRELAND.

  • Analysis of aqueous solutions

    IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically about 1 minute.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Wet gas monitoring for refineries

    Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Measurement solution for soil chamber gas flux

    Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas analysis & monitoring system for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and above (ie billionths of a meter to half a millimeter).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Moisture Monitoring for Natural Gas & LNG

    The presence of moisture in high-pressure natural gas from production wells causes pipelines and associated valves to freeze. High moisture content also leads to the formation of hydrates of the liquid hydrocarbons present, thus causing further difficulties. The moisture content of the gas also adversely affects the calorific value of the gas, thus lowering the quality and value of the product. Moisture is therefore measured at the point of extraction, at export stations, at gas storage locations and in the transmission grid. As natural gas often contains high levels of contaminants, more complex systems are required to maintain instrument performance over prolonged periods and to verify data collected in spot-check moisture analysis.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Flow & Energy Management Solutions for plant & machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    Flow Measurement instrumentation for mass flow measurement & control flow solutions

    We manufacture a variety of mass flow technologies for precision measurement of gases, liquids, and steam.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is constructed of glass and stainless steel. The calibration standard is injected by a syringe through a replaceable septum in the center of the injection glassware, which is heated. After enough time has elapsed, typically less than five minutes, the tube is removed from the ATIS and analyzed using the appropriate analytical technique for that adsorbent tube.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you