Only show results available in Virginia? Ok

liquid waste treatment Applications

  • Air pollution control for the liquid waste treatment industry

    Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • High-speed turbine machines for treatment of water and liquid waste

    A comprehensive solution for liquid waste and suspensions in industrial technologies. Sludge thickening solution in communal wastewater treatment plants.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Wastewater Treatment & Filtration

    4. Metallurgy: Lead Pb, copper Cu, zinc Zn, tin Sn, manganese Mn, nickel Ni refinement Refinement of various non-ferrous metals Precious metal refinement (Ag, Au, Pt, Pd) Liquid electroplating waste "Washer water" from blast furnaces

  • Premium

    Water treatment solutions for the industrial water supply industry

    Water is widely used in industry, whether it is encountered as raw water, process water or waste water. Very often this water must be treated before entering the process to ensure its quality and properties will meet the specifications demanded by the industrial process. In addition, with recent discharge regulations and policies towards zero liquid discharge, there is a high demand for solutions for recycling and reuse of waste water produced. Lenntech provides sustainable and complete solutions for water and...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Wastewater evaporator Solutions for the air scrubber wastewater treatment

    Water wash air scrubbers are used for air pollution control in many industries that discharge gasses and smoke, to remove pollutants from the gas stream. A high-energy liquid spray washes the gas and removes pollutants from the air, These pollutants are then trapped in the water used for washing the gas. Safe disposal of air scrubber wastewater can be acheived by separating out the solids, using a Draygon Wastewater Evaporator.Draygon created the original "run-dry" evaporators, which can be run dry without...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine...

  • Wastewater treatment solutions for fat, oil & grease

    Proper waste treatment and free-flowing plumbing lines are critically tied to one another. Of the many products marketed which claim to aid plumbing problems, MICROCAT® products are unique. They offer a combination of micro organisms, enzymes (biochemical catalysts) and other ingredients which act together naturally to soften, loosen, remove and break down greases, fats and oils in plumbing lines, sewer systems, pump stations and treatment plants, thus keeping them clean and odour free. Developed through the...

    By QM Environmental International B.V. based in The Hague, NETHERLANDS.

  • Wastewater Treatment for Municipalities

    PBS Velká Bíteš develops and manufactures machines for the separation of solid and suspended particles from liquids. The so-called "Decanter Centrifuges" can be used for a wide range of applications: from separation of municipal and industrial sludge in waste water treatment plants, through food and chemical industries up to agriculture. In the area of separation, we offer not only the decanter centrifuges themselves, but also the related services, including servicing of third-party...

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Wastewater treatment for the sea- and inland ports/terminals

    Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid...

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Filter technique solutions for the metalworking industry

    Recycling of washing- and cooling water. Treatment of lubricant-, cooling- and cutting emulsion, treatment of grind waste water. filtering liquids in metal processing.

    By KLASS-Filter GmbH based in Türkenfeld, GERMANY.

  • Activated Carbon Filtration for the Water Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase...

    By General Carbon Corporation based in Paterson, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you