Only show results in Virginia? Ok

locator Applications

  • Mobile Sewage Treatment for Remote Locations

    NOMADIC™ mobile sewage treatment systems are fully customizable, pre-plumbed, pre-wired and ready to be deployed in any off-the-grid location. The versatility of our systems allows them to be shipped using any method necessary to access your remote location.

    We do not limit ourselves by focusing on one specific application, we believe our technology can be used anywhere in the world where people require environmentally friendly sewage treatment.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • Premium

    Multigas Monitoring in Various Locations

    Application: Measurements of multiple gas species in various locations. Example: Measuring NH3 emissions and CH4 emissions monitoring from agricultural sources.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Single Gas Monitoring - Variable Locations

    Application: Measurements of a single gas in variable locations. Example: the detection of CH4 hotspots in landfill.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Mining & minerals solutions for man camps industry

    In remote locations and mine sites distant from the nearest outpost, WesTech provides package plants for water treatment and for wastewater process that allow for drinking water to be made onsite and basic levels of sanitary safety to be met, allowing for continued production and a healthier site and workforce.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Noise monitoring solutions for noise source identification

    Before you can determine what design changes are appropriate to reduce the noise emitted by a product, you need to be able to characterise it in terms of: Spectral content: The location of the dominant sources. The relative importance of dominant sources. Noise Source Identification employs a number of tools to perform such a characterisation.

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure has been providing EDI technology to the power plant market since 2002. Power plants around the globe are utilizing our Electropure EDI including locations in the United States, Central America, Europe, the Middle East, and China. With the introduction of our higher-capacity EXL product we are now able to serve a greater share of the power plant market including larger installations.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Sea Water Intakes & Outfalls

    Desalinated sea water is a major water source for many countries. These facilities are often built with power generation plant and a major factor for all installations is reliability. This reliability starts with the sea water intake and regardless of the desalination technology (MSF, MED, RO) unplanned plant shut downs due to the ingress of hydrocarbons or a sudden jelly fish attack are absolutely unacceptable. The DESMI Oil Spill Response segment have many years experience in the design, manufacture, installation and commissioning of permanent oil boom and jelly fish net systems for a vast range of sea water intake systems. We have an impressive history of proven oil spill technology at various locations around the world including the harsh Middle East environment.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

    The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Fast Water, Rivers & Lakes

    Oil spill response operations are notably difficult in rivers with strong current. In addition, when considering response times for river spills in relation to the mobilisation time required for conventional land- or vessel-based boom systems, a timely response is often a logistic impossibility especially in the more remote regions. Therefore, equipment must be readily at hand near the sites of operation and pre-rigged lines, cables and mooring areas are a must. Selection of a good location to deploy the oil containment system is dependent upon prior planning and understanding of the currents. Drift studies, river run off histories, tidal current tables and charts, plus computer modeling are all useful tools to understand the flow patterns and to develop recovery strategies. Reading the currents and flow patterns require practice and understanding of the hydrodynamics involved.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    pH value and conductivity measurement for power plants

    The pH value and the conductivity have to be determined quasi-continuously at numerous locations in a power plant. The pH value is a key parameter to control the amount of lithium hydroxide that has to be added to the primary circuit of a pressurized water reactor; in water steam circuits, the pH value controls the amount of added amines. The conductivity indicates the amount of dissolved minerals. It is a measure of the water purity and is one of the most important parameters for any chemical control program in a power plant. It is determined at numerous sampling points in the power plant, for example, in the cooling water circuit, in feed and makeup water, at the outlet of the condensate pump, and in the primary circuit of a pressurized water reactor.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest

    It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle phase. The current number is that, on a global scale, SOA would represent around 60% of the overall OA.3 However, recent global mass-balance estimations for the removal of volatile organic compounds (VOC) suggest that this number could under-predicts SOA production.4 Recent field measurements in urban locations are also in support of a larger share, indicating that SOA is the dominant fraction of OA, with amounts considerably 20 greater than models predictions.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Portable Leak Detection

    GasFinder2 can be used as a portable open path gas sensor to survey a large site relatively quickly. Areas of elevated gas concentration can be bracketed using shorter path lengths in order to locate leaking valves, flanges or fittings.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Air filtration and gas purification solutions for preservation

    The location of archives in an appropriate environment is crucial for their adequate preservation. There are many studies which identify environmental pollution as the principal problem in the conservation of historical objects. Acidic gasses such as sulphuric acid, nitrogen and carbon are the most common contaminants as these acidify archived materials, accelerating their deterioration.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Gas Detection Solutions for Aluminium

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Worker safety and ambient air quality concerns require that HF be monitored at several locations in smelters. Traditionally, a variety of chemical sampling methods have been used for HF monitoring in and around smelters. However, these methods are labour intensive and require ongoing maintenance and consumables. During the past decade, laser based HF analyzers have been replacing the traditional methods. Laser analyzers are compact, robust and reliable and provide accurate HF data. Fast response times that enable easy correlation of high HF emissions with work practices.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you