Only show results available in Virginia? Ok

lubricant system Applications

  • Premium

    Lubricating oils for oil & gas industry

    Lubricating oils contain chemical additives that give the oil a greater in-service life. These additives contain a range of elements such as Calcium, Zinc, Phosphorus, Magnesium, Chlorine, Molybdenum etc whose concentration need to be measured as part of a quality control/assurance system to demonstrate conformance to specification.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • High performance separation system for silicones industry

    Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Oil Mist Separators for Shipbuilding

    A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. Throughput: 1,200 Nm³/h @ 50 Hz.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • Compact Filtration for Grinding / Grinding Processes

    CompactFiltration - Filter systems for cooling lubricants used in grinding processes; Well-maintained cooling lubricants play an ever more important role in grinding processes, to ensure customers` requirements are met with regard to surface quality and adherence to tolerances.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Microbial testing for liquid fuel handling sector

    On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Pulsair`s industrial mixers for blending & mixing additives

    Industrial additive mixing and blending equipment from Pulsair Systems. Pulsair industrial additives mixing systems are designed to efficiently mix and blend additives with base liquid products yielding faster blending times and a more homogenous solution at a much lower cost than traditional mixing systems. Pulsair mixing systems support many industries that require mixing additives such as lubricants, food processing, chemicals, paints and more. Our non-shear industrial additive mixing systems are highly energy efficient, easy to use and maintain, cost-effective and well suited for any base product and oil, food and chemical additive mixture. The Pulsair mixing process can efficiently mix in any size and number of tanks.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Pulsair`s industrial mixers for oil & lubiricants industry

    Pulsair Systems can custom design a system that mixes and blends tanks of virtually any tank size or configuration. No application is too large or too small. Our fast, efficient and economical Pulsair mixers can give you substantial savings on both electricity and compressed air. Our control systems can operate either single or multiple tanks. Whether it`s blending lubricants, mixing base stock and additives, thinning heavy emulsions or keeping storage tanks at a constant temperature, Pulsair Systems` technology has proven to be dramatically better. Our systems blends lubricants to specification usually within 30 minutes of adding all the ingredients used in your recipe. The result is a greater profit margin for you, the operator.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Welding Fume Extraction

    Welding fumes & gases are Unbreathable. Nonetheless, welding is perhaps the most common industrial process and necessary anytime the joining of metals is required. Regardless of the welding equipment type or technology, the simple process of melting metal and filler materials creates poisonous fumes and gases. ? Different types of welding processes present unique challenges to adequately handle airborne fumes. Robotic welding equipment and other automated welding systems produce a high volume of welding fumes and sparks and need to captured by a heavy duty robotic welding hood. Moreover, manual stick welding typically produces a high volume of smoke and often requires a self-cleaning fume extractor to avoid overwhelming the filters.? Lighter duty applications like MIG welding generally produce less particulate and light-duty TIG welding generates the least amount of smoke. It is important to not only consider the type of welding process but also the work piece material in order to select the correct filtration media for your application. HEPA filters are recommended for stainless steel welding, Nanofiber filters for Aluminum and parts containing higher levels of Manganese. Polyester filters are appropriate where rust inhibitor, lubricants and coatings create an oily smoke as these filters can be washed in water. Diversitech offers a complete line of fume collection machines from compact welding fume extractors to central welding fume filtration systems. We specialize in engineered solutions and our engineering team is experienced in selecting the best equipment and filter media for your particular application. We can present you with detailed technical drawings demonstrating several potential layouts and solutions including costing, installation and start-up expenses. ??

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you