Only show results in Virginia? Ok

manufacturing waste Applications

  • Premium

    Waste Compaction for the Manufacturing Industry

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    All of the models within HSM`s range of industrial balers are used for baling recovered recyclable materials into bales suitable for transporting to a recycling facility for processing. HSM balers for use in industrial or manufacturing settings are designed to allow maximum flexibility of working for the operator in that they can function on their own or as an integral part of a wider recovery system.

    Whether it’s a vertical, horizontal or fully automatic, channel baler that is required, HSM has a range of solutions for every location, and able to fit in to the available space.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Waste recovery for glass manufacturing

    Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste recovery for metal manufacturing

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Centrifuges for Industrial Waste Water, Minerals and Oil

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil from the cleaning of crude oil tanks. Processing of drilling slurry, drilling emulsion and drilling muds. Processing of ore and minerals.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Baling for wet insulation material manufacturers

    The above-mentioned solutions are already available. New demands on us only mean new challenges. The bale can be bound according to the weight of the material transported into the baler. The material can be partially torn apart for easier filling if there are very large pieces at the filling entrance. We offer a baler that is adjusted to the baling of wet material and to having water leakage. Slide sleeves and other exposed parts are made of solid, wear-resistant materials because of the abrasiveness of the glass and rock wool materials.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • metal scrap baler

    Y81 hydraulic balers for scrap copper are suitable for all kinds of scrap metal as following Apply in: 1. Various steel paring 2. Scrap metals, such as waste copper, aluminum, copper and so on 3. All kinds of old things made of metal, like aluminum can, household appliances, oil drum bike, car etc

  • Automatic binding devices for Cardboard factories and cardboard packaging manufacturers

    Printing offices, cardboard factories or cardboard packaging manufacturers, aluminum foils, hygiene paper. Do you want a quality baler that isn’t affected by dust and small pieces?. Looking for a complete solution that includes a transport system from the origin of the waste to the baler?.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Waste processing for the waste industry

    Trislot manufactures screens for dewatering, classifying, sizing and other applications for waste processing. All applications are based on the numerous advantages the Trislot screen provides: very precise slots for exact sizing, high strength, all welded structure, non clogging slots, low maintenance, long service life, custom made.

    By Trislot N.V. based in Waregem, BELGIUM.

  • Premium

    Balers and compactor solutions for industrial companies

    In today’s business environment every element of a company’s activity has an effect on the bottom line. Inefficient waste handling is time consuming, expensive and takes time and energy from what really matters.

    By Bramidan Balers based in Bramming, DENMARK.

  • Premium

    Marpol Shredders for Marine Industry

    SA Eng manufactures industrial shredders dedicated to the marine industry, in compliance with the MARPOL 73/78 regulations - V, about the shredding of the food waste before it is discharged into the sea. The machines, as required by the legislation itself, guarantee a final size below 25mm. The shredders, designed to be installed on board of cruise ships, ferries, offshore platforms can also treat light material such as paper, cardboard, cans, plastic bottles etc.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Waste Compaction for the Depackaging Systems for Food Waste Industry

    The food and drink industry relies on modern packaging materials and systems to extend the life of its products and to make them easy to store and transport. Inevitably during these processes wastage occurs whether this is when food expires, through faulty packaging or is otherwise unfit for sale or consumption, disposal can become a costly burden for the food manufacturers or retailers.

    HSM depackaging equipment solution, the universal recycling presses (URP’s) are designed to recover organics from food waste and deal with a variety of materials from plastic wrapping and containers, to wax-coated cardboard and even metal cans.

    HSM depackaging machines make it possible to efficiently recycle and recover organic and packaging waste from food waste.

    For more information or to discuss your baling needs, please contact us!

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Waste recycling systems for wood waste processing

    Kiverco specialise in the design, manufacture and installation of Wood Waste Processing systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Wood Waste Processing recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Waste recycling systems for composting

    Kiverco specialise in the design, manufacture, and installation of compost recycling systems that will be unique to your compost recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Composting recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Treatment of industrial wastewater with high oil content

    This type of waste water is characterised by high oil and grease loads from hydrocarbons.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you