Only show results available in Virginia? Ok

material test equipment Applications

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site...

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Premium

    Air monitoring for laboratories

    Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels.

    Common air monitoring applications include:

    • Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination.
    • Asbestos sampling and analysis

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Asphalt Applications Testing PAH Content

    New regulations require testing asphalt for PAHs. Sitelab's UVF-3100D and TD-500D analyzers can test asphalt quickly and accurately. Results takes less than 5 minutes. The equipment is easy to operate.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Data loggers and data acquisition monitoring solutions for the life sciences industries

    Life sciences applications require continual monitoring of incredibly temperature and time-sensitive materials, including blood, vaccines, tissue samples, new medicines and drugs, and more. Our signature Accsense wireless and wired data loggers monitor refrigerators, freezers and cryostats 24/7 to safeguard these invaluable goods and provide advanced alarming and messaging.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining...

    By Geomorph Instruments based in Piraeus, GREECE.

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Saran Bag application

    Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment....

    By Analytical Specialties, Inc. based in Elburn, ILLINOIS (USA).

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to...

    By OVT Environmental Products based in Cape Coral, FLORIDA (USA).

  • Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all...

    By Envibat AB based in Skellefteå, SWEDEN.

  • Innovative Pump Technology for Oil and Gas Industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has...

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • Independent particle characterization services for abrasives industries

    Serving the abrasive industry over the last 2 decades, the most common testing performed for this field is particle size and shape analysis. The world of abrasives can encompass a host of varying materials from diamond dust, silicon and tungsten carbide, fused silica and quartz, to polished glass and medical abrasives. particle_size_of_abrasives With sizing instrumentation capable of measuring from a few nanometers up to 2000 microns and classic techniques such as sieving for even larger sizes, PTL has the...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you