Only show results in Virginia? Ok

material testing Applications

  • Premium

    Instruments and analyzers for outdoor material testing

    Weathering of materials is most often an irreversible process affecting the cosmetic properties or strength of materials. This aging process is mainly driven by UV radiation, Heat and reactive elements in the atmosphere, for example chemical contamination. The plastic fabric of the product can dry and therefore weakened. The solar load can overheat the products and change material properties irreversibly. A common method to test the deterioration of materials is to expose materials to sun light and...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Asphalt Applications Testing PAH Content

    New regulations require testing asphalt for PAHs. Sitelab's UVF-3100D and TD-500D analyzers can test asphalt quickly and accurately. Results takes less than 5 minutes. The equipment is easy to operate.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Stack Testing for Cement Production Facility

    LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site...

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Smoke generator device for building envelope, energy studies & air tightness testing

    The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Formulation

    No matter whether flavorings, spices, or pharmaceutical powders are involved, formulation requires precision. Incorrect mixtures are costly and may even be dangerous. Irrespective of the complexity of your formulas, how many materials you use, and whether the quantities are large or extremely small: METTLER TOLEDO formula-weighing solutions can fulfill all your requirements.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Smoke generator devices for lev testing, spray booth clearance testing & air testing

    For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Determination of preservatives (benzoic, sorbic acids and their salts) and sweeteners (acesulfame K, saccharine and its salts) in food products and raw materials, and dietary supplements

    Various food additives – preservatives (benzoic acid, sorbic acid, and their salts), sweeteners (Acesulfame K, saccharine and its salts) and others are widely used in food industry for the improvement of food products properties and extension of storage life. The amount of these additives in food products is regulated by technical instructions and other norms. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Control Panel-Material Handling Applications

     Tredwell offer control panel design and manufacture, which allow us control the quality of every panel required for every project. Our experienced and professional team of design engineers and assembly technicians manufacture, test and ship control panels ranging from small push button enclosures, to large motor control panels.

    By Tredwell Electrical Ltd based in Limerick, IRELAND.

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Density Measurement

    Density determination using the buoyancy method. Density determination is used in many areas to characterize certain properties of a product or material. Density determination applications are not only numerous, but also frequently associated with very specific requirements. METTLER TOLEDO offers a range of hardware and software options for determination of density using the gravimetric measuring method.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Continuous Instream Monitoring

    Turbidity in natural waters is recognized as an important indicator of its environmental health, and because it's a good surrogate for suspended sediment, monitoring turbidity has always been the "holy grail" for hydrologists. But because of earlier technology, "turbidity" has traditionally been a "bad word". The DTS-12 turbidity sensor is the first sensor to make turbidity monitoring practical, and no longer difficult, inaccurate, expensive, or labor-intensive. Turbidity is the cloudiness or murkiness of water...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Analysis of aqueous solutions

    IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically...

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task.

    With over 25 years of experience in geomembrane conta...

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Premium

    UV fluorescence technology for raw water intake monitoring industry

    Naturally occurring organics in raw water are typically removed with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when generic organic material is present but cannot differentiate between natural organics, such as algae or decomposed plant matter, and hydrocarbons. Using UV fluorescence technology, a properly configured TD-4100XD can alert operators to upsets caused by hydrocarbons such as gasoline, diesel, fuel oil, and crude oil.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you