Only show results available in Virginia? Ok

material testing equipment Applications

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into the air we breathe. The REACH regulation places the responsibility on manufacturers and importers to test their products and provide safety information to the purchaser, end user or consumers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site work).

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Air monitoring for laboratories

    Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels.

    Common air monitoring applications include:

    • Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination.
    • Asbestos sampling and analysis

    By GE Healthcare UK Limited based in Little Chalfont, UNITED KINGDOM.

  • Premium

    Asphalt Applications Testing PAH Content

    New regulations require testing asphalt for PAHs. Sitelab's UVF-3100D and TD-500D analyzers can test asphalt quickly and accurately. Results takes less than 5 minutes. The equipment is easy to operate.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • In-process and preshipment inspection, testing and expediting of mechanical and electrical equipment for the hydropower industry

    INSPECTEAM Hydro performs the surveillance of your suppliers on your behalf by offering inspection and expediting services across Europe. Such as supervision, in-process and preshipment inspection and testing and expediting of mechanical and electrical equipment for the Hydropower industry. INSPECTEAM Hydro’s scope of work is to ascertain that products and materials meet the contract requirements, by ensuring that they conform to the design and standards specified by our clients in the purchase order and in the other contractual agreements. We have a team of qualified engineers and quality/NDT inspectors, experts in the energy sector and especially in the hydropower and water resources industry. Our team is subject to a continuous training program and offers our clients the highest technical competence and professional skill.

    By Inspecteam Hydro based in Godstone, UNITED KINGDOM.

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Saran Bag application

    Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment. Using a Tracor MT-150 gas chromatograph equipped with Nickel 63 electron capture detector and polarized dc voltable, it was possible to detect sulfur hexafluoride at a concentration of 0.06 ppb with a 5A molecular sieve column and nitrogen carrier gas, without preconcentration of the sample. Also, a comparison of glass and Saran sampling materials proved that no detectable loss of the tracer gas resulted with the Saran bags (between 6 ppm and 0.06 ppb SF6

    By Analytical Specialties, Inc. based in Elburn, ILLINOIS (USA).

  • Premium

    Pressure Monitor use in a Containment Area

    When using negative pressure containment, it is important to monitor the pressure inside the containment in reference to the outside area. However, because the typical negative pressure required is usually only 0.020”WC, it can be difficult to find equipment sensitive enough to measure and monitor your containment area. Omnitec Design has two options to meet this need. Both the Watchman Differential Pressure Monitor and the self-contained Omniguard 4 Pressure Recorder are designed to provide highly accurate monitoring and alarm functions while still being easy to setup with a simple push-button calibration. A pressure monitor is a very important tool that can help ensure the integrity of a containment. Dealing with hazardous debris from abatement/remediation jobs can be a sensitive task that demands safe practices by workers to guarantee their safety, and those who may come into contact with potentially harmful material.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to employees due to non-breakable material, lighter carrying weight and no sharp cutting edges as on aluminum foil boxes or use of razor knives; • Lid is recyclable & container is made from an environmentally friendly biodegradable material (corn-based) ; • Disposable container reduces potential for cross-contamination of samples (creating invalid data) due to washing and reusing mason jars from multiple sites; • The OVT cell can be purchased on-line and shipped directly to your office or obtained at a local equipment rental location. • Granted a USPTO patent and accepted by the Florida Department of Environmental Protection-BPSS as an Innovative Technology.

    By OVT Environmental Products based in Cape Coral, FLORIDA (USA).

  • Innovative pump technology for oil and gas industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has also invested to another modern producing plant in Shanghai for ceramic membranes production,with a whole set of equipment like Vacuum Pugmill, Extruder, Oven, Full Automatic High Temperature Furnace, and Testing Machines. All raw material is high quality from domestic and abroad porus ceramic membrane filter with first grade quality could be manufactured under our unique technic and strict quality control system.

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • Independent particle characterization services for abrasives industries

    Serving the abrasive industry over the last 2 decades, the most common testing performed for this field is particle size and shape analysis. The world of abrasives can encompass a host of varying materials from diamond dust, silicon and tungsten carbide, fused silica and quartz, to polished glass and medical abrasives. particle_size_of_abrasives With sizing instrumentation capable of measuring from a few nanometers up to 2000 microns and classic techniques such as sieving for even larger sizes, PTL has the expertise and equipment capable to measure any abrasive type and size. Particle size distribution analyses on abrasives provide valuable insight to engineers in several areas. For example, attrition products from classified spent abrasives can often be seen as a shift to smaller particle sizes.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you