Only show results in Virginia? Ok

material testing industry Applications

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site...

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Corrosion-resistant materials for Sulfur & capping compounds industry

    Sauereisen No. 600 flake Basolit Sulfur Capping Compound has been used for many years by concrete testing laboratories for testing concrete cylinders for comprehensive strength.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Stack Testing for Cement Production Facility

    LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    UV fluorescence technology for raw water intake monitoring industry

    Naturally occurring organics in raw water are typically removed with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when generic organic material is present but cannot differentiate between natural organics, such as algae or decomposed plant matter, and hydrocarbons. Using UV fluorescence technology, a properly configured TD-4100XD can alert operators to upsets caused by hydrocarbons such as gasoline, diesel, fuel oil, and crude oil.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the construction industries

    Common examples of construction applications include curing concrete, structural testing, temperature monitoring of building materials, vibration monitoring, and more. CAS DataLogger offers many durable and weatherproof data logging solutions monitoring temperature, vibration, pressure, force, and more, along with vibrating wire strain gauge support.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Data loggers and data acquisition monitoring solutions for the life sciences industries

    Life sciences applications require continual monitoring of incredibly temperature and time-sensitive materials, including blood, vaccines, tissue samples, new medicines and drugs, and more. Our signature Accsense wireless and wired data loggers monitor refrigerators, freezers and cryostats 24/7 to safeguard these invaluable goods and provide advanced alarming and messaging.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Smoke generator devices for lev testing, spray booth clearance testing & air testing

    For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Determination of preservatives (benzoic, sorbic acids and their salts) and sweeteners (acesulfame K, saccharine and its salts) in food products and raw materials, and dietary supplements

    Various food additives – preservatives (benzoic acid, sorbic acid, and their salts), sweeteners (Acesulfame K, saccharine and its salts) and others are widely used in food industry for the improvement of food products properties and extension of storage life. The amount of these additives in food products is regulated by technical instructions and other norms. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Premium

    Temperature measurement and control devices for aircraft & aerospace industry

    TTEC manufactures T/C`s & RTD`s for a variety of Aircraft & Aerospace Applications, including Test Stands, Environmental Chambers and Heat Treating Furnaces for Aircraft Components. NIST Traceable calibration tests and material tests reports are available as required. TTEC Style 8012 RTD`s with DIN Class A special accuracy are use to precisely measure Environmental Chamber Temperatures. These Chambers re-produce in-flight conditions that aircraft parts will be exposed to. Accurate & Stable readings...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Application package FLUXANA Glass

    This application package is a `ready to go` calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Application package FLUXANA RAW

    This application package is a 'ready to go' calibration kit for xrf instruments. It can, for example, contain all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the...

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Reliable Shredding Technology for File, Data and Material Destruction

    Our hard drive shredders and industrial paper shredders reliably protect your sensitive and confidential data from the prying eyes of third parties. We guarantee a secure and uncompromised destruction of your data pursuant to the most recent DIN 66399 standard. We offer customized shredding solutions depending on the required protection class, security level and type of data to be processed. Our robust hard drive shredders and industrial paper shredders have been tested and proven over several decades and...

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Premium

    Application package FLUXANA RAW- Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package raw materials can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed...

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Microbial testing for personal care products sector

    The Problem: Microorganisms. personalcareMicrobiological contamination is a threat to product quality and process integrity in the personal care products and life sciences manufacturing industries – the purity of raw materials including water is essential to ensure manufacturing compliance. Microorganisms may be introduced at several stages of the process; subsequently, manufacturers must put in place stringent Quality Assurance / Quality Control (QA/QC) programs to manage microbiological contamination.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you