Only show results in Virginia? Ok

material testing product Applications

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Stack Testing for Cement Production Facility

    LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Instruments and analyzers for outdoor material testing

    Weathering of materials is most often an irreversible process affecting the cosmetic properties or strength of materials. This aging process is mainly driven by UV radiation, Heat and reactive elements in the atmosphere, for example chemical contamination. The plastic fabric of the product can dry and therefore weakened. The solar load can overheat the products and change material properties irreversibly. A common method to test the deterioration of materials is to expose materials to sun light and environment....

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

  • Premium

    Determination of preservatives (benzoic, sorbic acids and their salts) and sweeteners (acesulfame K, saccharine and its salts) in food products and raw materials, and dietary supplements

    Various food additives – preservatives (benzoic acid, sorbic acid, and their salts), sweeteners (Acesulfame K, saccharine and its salts) and others are widely used in food industry for the improvement of food products properties and extension of storage life. The amount of these additives in food products is regulated by technical instructions and other norms.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for personal care products sector

    The Problem: Microorganisms. personalcareMicrobiological contamination is a threat to product quality and process integrity in the personal care products and life sciences manufacturing industries – the purity of raw materials including water is essential to ensure manufacturing compliance. Microorganisms may be introduced at several stages of the process; subsequently, manufacturers must put in place stringent Quality Assurance / Quality Control (QA/QC) programs to manage microbiological contamination.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • XRF analysis for product testing & toy safety

    Each week brings a new report of problems with toy safety and consumer product safety. Ultimately, contract manufacturers, importers, distributors, retailers and brand owners all face potential liability when they fail to comply with laws which restrict the levels of toxic materials in their products. Handheld Niton analysers provide quick and easy screening of toys and other consumer goods for lead, cadmium, mercury and other toxic metals. Importers, brand owners and retailers can implement a standardised...

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Density Measurement

    Density determination using the buoyancy method. Density determination is used in many areas to characterize certain properties of a product or material. Density determination applications are not only numerous, but also frequently associated with very specific requirements. METTLER TOLEDO offers a range of hardware and software options for determination of density using the gravimetric measuring method.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task. With over 25 years of experience in geomembrane containment technology,...

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Premium

    Application package FLUXANA Glass

    This application package is a `ready to go` calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Application package FLUXANA RAW- Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package raw materials can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed...

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Application package FLUXANA Continous Casting Powder

    This application package is a `ready to go` calibration kit for xrf instruments. Together with the company Stollberg, FLUXANA has developed a fused bead method for the product control of continuous casting (CC) powders. The general idea was a universal program which covers a wide product range and that is also able to control the used raw materials. The result was two different application packages each with a set of standards and a set of control samples.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to...

    By OVT Environmental Products based in Cape Coral, FLORIDA (USA).

  • Precision moisture analysis instruments for moisture and solids testing for batteries

    Quickly test cathode powders and other advanced materials: In batteries, it has never been more critical to get the best quality product to market. Whether intended for an electric car, a smartphone, or a smoke detector, the quality of any battery will depend on how accurately its moisture content is controlled. Computrac can help. Computrac can quickly provide moisture-specific and total solids content results in a manner that does not depend on operator technique. In addition to instruments based on the loss-on-d...

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • XRF analysis for environmental applications

    Niton analysers are versatile environmental testing instruments that provide valuable assistance in portable soil testing applications such as brownfield site investigation. With the ability to analyse a wide range of materials, our instruments provide lab-quality soil/sediment chemistry in seconds. Lead, arsenic, cadmium, chromium, and other toxic metals contaminate sites of former industrial and agricultural activity around the world. Whatever the reasons for these occurrences, these pollutants cannot be...

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Sorbents

    SorbEater is a synthetic super-absorbent with the highest oil recovery ratio of ANY known absorbent material resulting in less product required and less product to dispose of. This provides significant savings on the costly disposal fees associated with hazardous waste. It is highly effective on fresh water, soil, sand and sea. During development it outperformed the traditional organic peat products in every test. Ideal for: Any hydrocarbon spills or contamination. It has been used successfully with...

    By Skyhawk Global Ltd based in Barry, UNITED KINGDOM.

  • Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all sizes,...

    By Envibat AB based in Skellefteå, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you