Only show results available in Virginia? Ok

materials recycling manufacturer Applications

  • Baling for wet insulation material manufacturers

    The above-mentioned solutions are already available. New demands on us only mean new challenges. The bale can be bound according to the weight of the material transported into the baler. The material can be partially torn apart for easier filling if there are very large pieces at the filling entrance. We offer a baler that is adjusted to the baling of wet material and to having water leakage. Slide sleeves and other exposed parts are made of solid, wear-resistant materials because of the abrasiveness of the glass and rock wool materials.

    By Anis Trend d.o.o. based in Loški potok, SLOVENIA.

  • Premium

    Magnets for the plastic and glass manufacturing industry

    Magnetic equipment including Eddy Current separators from Master Magnets are used to remove ferrous and non-ferrous impurities from shredded plastics and crushed glass. The segregation of Aluminium ring-pulls and bottle caps ensures a cleaner glass product for efficient recycling. Master Magnets supplies an extensive range of magnetic separation equipment for the purification of recycled plastics and glass. Substantial amounts of ferrous and non-ferrous contamination can often be recovered from these products, providing a cleaner and more valuable end product.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Shredders and crushers for refrigerator recycling

    Erdwich reclaims even Pentane and CFCs with 99% purity! Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. The fact that pre-processing of legacy refrigeration units always needs to be carried out in accordance with the latest technological standards means that plant operators gain a decisive advantage when working with an innovative and experienced plant manufacturer.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Waste recycling systems for wood waste processing

    Kiverco specialise in the design, manufacture and installation of Wood Waste Processing systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Wood Waste Processing recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Metal detection for in the Recycling Industry

    Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Eriez metal detectors have varied applications in large array of industries from aggregates to recycling, ceramic to food, mineral processing to glass, plastics and rubber to packaging. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Recycling Solutions for the panelboard productions

    Since the MDF-board production has started, ANDRITZ has continuously influenced the panelboard industry with on-going technical and technological developments and responsive services. ANDRITZ is one of the leading suppliers for complete front end-packages for the MDF-industry, consisting of the wood yard, the chip washing system and the pressurized refining system. ANDRITZ designs tailor-made solutions for each customer depending upon the raw materials used. The systems can process wood chips, sawdust, shavings, and annual plants such as bagasse or straw.

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Waste recycling systems for materials recovery facilities (MRF)

    Kiverco specialise in the design, manufacture and installation of Materials Recovery Facilities that can be tailored to your unique specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your MRF recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Electronic scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. With many successful customers operating around the world, SSI has found the best electronics scrap processing system design philosophy is to employ machinery to separate commodities at the first point they become marketable, at the highest capacity possible, and refine high value materials after initial separation.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Heavy-duty balers for paper mills

    We manufacture heavy-duty type ATS110-110 balers, adjusted to your specifications, and with a large 120 x 190 cm filling shaft, 5 horizontal binding devices, 110–205 ton compression force, and 45–180 kWs of power. We also offer smaller balers such as the ATS75-100 and ATS75-75. Each baler can be equipped with an anti-blocking system for dealing with congestion due to an excess of loaded material. We also offer smaller automatic channel presses without the binding device for water extrusion from the waste during paper production.

    By Anis Trend d.o.o. based in Loški potok, SLOVENIA.

  • Food Waste Recycling, Reduction or Disposal Systems for Marine Vessels

    Applications include: •Luxury Yachts: With space a premium on most luxury yachts having a system on board that that can reduce the volume and weight of the wastes is key – we have a growing number of Gobi drying systems being specified as the alternative to cold storage of food wastes •Exploration Vessels: Being at sea for lengthy periods of time and in certain areas no longer being allowed to dispose of food wastes directly to sea, means that the food wastes have to be stored on ship. Traditionally the wastes are either frozen – but this takes up valuable space in the fresh food freezer, or stored in bins on ship, but in hot temperatures these wastes expand give off gas and become a hazard, using the Gobi dryer and producing a sterile inert material 80% less in weight and volume that will no longer putresce is a perfect solution.

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • Premium

    Waste compaction for the manufacturing industry

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers. All of the models within HSM`s range of industrial balers are used for baling recovered recyclable materials into bales suitable for transporting to a recycling facility for processing. HSM balers for use in industrial or manufacturing settings are designed to allow maximum flexibility of working for the operator in that they can function on their own or as an integral part of a wider recovery system.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Thickening and dewatering of fibrous materials for Pulp and Paper

    The dewatering of fibrous material is a fundamental process in the paper and pulp production, but also in all other manufacturing processes using or treating fibre suspensions.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Material handling equipment for petroleum and coal industry

    Petroleum Refineries, Asphalt Paving, Roofing, and Saturated Materials Manufacturing, Asphalt Paving Mixture and Block Manufacturing, Asphalt Shingle and Coating Materials Manufacturing, Other Petroleum and Coal Products Manufacturing.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Waste recycling systems for construction & demolition

    Kiverco specialise in the design, manufacture and installation of Construction and Demolition waste recycling systems. We can offer a C & D recycling plant that can be tailored to your unique recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your C & D recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Shredding of packaging materials and packaging waste with Mercodor shredding systems

    The shredding of packaging materials and packaging waste such as, for example, medicinal product packaging, but also foils, can present challenges to the shredding machine due to their different sizes, but also due to the various raw materials from which the packaging materials are manufactured. However, the shredding of foils and other packaging waste is an important step in the recycling of raw materials. The Mercodor shredders are best suitable for shredding of packagings and packaging materials. We at Mercodor will be happy to advise you on the subject of crushing of packaging materials and packaging waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Plastic shredders

    Plastic shredding As a renowned manufacturer of reliable plastic shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation. Our plastic shredders were developed specifically for the processing of these components. They deal effortlessly with all kinds of plastics, ranging from foils, lumps, profiles, fibres, ribbons, PET bottles and hollow parts to post-consumer and production waste. Thanks to a range of different cutting systems, rotor diameters and shapes as well as different blade sizes, the shredders are suitable for thermoplastics, duroplastics and elastomers. A Customized plastic shredder for you

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Measurement solution for glass wool insulation manufacture

    The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process "green".

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Shredding solutions for refrigerators industry

    SatrindTech shredders are used within the recycling lines of refrigerators. When treated properly, it is possible obtains a total of nearly 90% in different materials (among which iron, plastic, polyurethane, aluminum and copper) from these product. The two shaft shredders are used as primary crushers if used as the first step of the process as they are used for a volume reduction after the collecting cycle, while the three-shaft and four-shaft are used as secondary shredding as they allow a controlled size.

    By SatrindTech Srl based in Arluno, ITALY.

  • Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you