Only show results available in Virginia? Ok

medical waste Applications

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Medical Waste Recycling

    By Fulcrum Environmental Solutions Inc based in Edmonton, ALBERTA (CANADA).

  • Premium

    Medical waste shredding

    Custom Shredding Systems for Destruction of a Variety of Medical Wastes. Red bag, linens, plastic sheets, latex gloves, syringes and sharps containers, boxed medical waste.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Hazardous and Medical Waste shredder

    HARDEN designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. HARDEN has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Stack Testing for Medical Waste Industry

    INFECTIOUS WASTE INDUSTRY: Provided annual testing for metals, particulate, HCl, dioxins/furans, and typical continuous emission monitoring constituents.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Hazardous & Medical waste shredding

    SSI designs and manufactures shredders and size reduction systems for safe disposal of hazardous, medical and pharmaceutical waste. SSI has extensive experience in the supply of purpose engineered reduction, fuel blending and destruction systems for the hazardous and medical waste processing industries.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Medical and Bio-hazard Waste Treatment Technology with zero emissions

    The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated waste can be used as fuel in a WTE (waste-to-energy) facility. (CV 36.4 MJ/kg)

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Premium

    EH&S Regulatory Compliance Management for Electronics And Medical Devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) to US legislation on conflict minerals. The depth and amount of information that suppliers must access, evaluate, compile, integrate and disclose is growing exponentially.

    By 3E Company based in Carlsbad, CALIFORNIA (USA).

  • Measurement solution for medical workplace monitoring

    In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a good state of repair or not. Recovery rooms can become polluted, for example from gas exhaled by the patient, and clean-up from any spills can remain in the background air for long periods.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    organic waste Applications

    Emissions of waste in life more and more, including waste, medical waste, industrial waste, eat hutch garbage, but the content is more of living garbage, about 60%. In order to achieve reduction, innocuity and recycling of living garbage disposal method is landfill, incineration, the early stage of the process chain is the breakage reduced size first, then on to the next step processing, this would require the use of garbage crusher is suitable for the living garbage.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Decentralized RDF/MSW power plants

    A local WtE CHP solution for every town / city. Technical team, led by Lambion company, has successfully delivered and installed over 3000 projects in the last 90 years in field biomase and waste fuels Fully EU Standards compliant Engineering supply chain is in place and ready Full understanding of legal, planning and environmental compliance and procedures Projects can be 13 / 21 / 25 MWth (input) systems. Waste streams can be Municipal waste, Industrial waste, Medical waste or Wood waste Typical customers are: Municipalities, Private owned comp. Paper and chemical industries Hospitals Forestry industry

    By LAMBION Energy Solutions GmbH based in Bad Arolsen, GERMANY.

  • H series

    to sterilize and reduce medical waste

    By OMPECO srl based in Moncalieri – Torino, ITALY.

  • Premium

    Gas monitoring instruments and systems for anesthetic gases

    The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, isoflurane, enflurane, halothane, desflurane, and methoxyflurane. Short-term exposure to these gases may lead to several symptoms, such as dizziness, headaches, fatigue, nausea. Long-term exposure to some of the anesthetic agents may result in sterility, birth defects, cancer, and liver and kidney disease.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Radiation Monitoring for Medicine and Research laboratories

    Medicine and Research laboratories The medical industry uses radioactivity to explore and heal the human body. In pharmaceutical laboratories, nuclear medicine practitioners and patients alike are exposed to ionizing radiation to various extents. These internal and external doses, generated by radiotherapy, scintigraphy and sealed or unsealed sources, require special precautions. Saphymo designs and manufactures various dose monitoring solutions, ranging from individual radiation protection to process and waste control. Research labs using accelerators or reactors can also rely on Saphymo’s ability to meet safety requirements by providing highly technical, custom-made devices suitable for monitoring both very low and very high activity. The Saphymo product ranges, from Radiation Monitoring Systems developed from A-Z by Saphymo to Survey meters and dosimetry, meet medical and research requirements to the full.

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE.

  • Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you