Only show results in Massachusetts? Ok

membrane cleaning Applications

  • Membrane cleaning solutions for nano-filtration water desalination

    Membrane cleaning solutions for nano-filtration water desalination.

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Membrane cleaning solutions for reverse osmosis water desalination

    Membrane cleaning solutions for reverse osmosis water desalination.

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Ceramic membranes and pressure vessels for environmental protection / waste water technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning...

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Membrane Filtration for Wastewater Treatment

    The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse...

    By MICRODYN-NADIR based in Wiesbaden, GERMANY.

  • Cleaners for Parts cleaning industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Chemical filtration in lacquers for the recycling industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Water treatment chemicals solutions for beverage industry

    In the beverage industry, large quantities of filtrate water and pure water are used to prepare and cool products as well as clean containers. Kurita Water Industries offers a range of products, such as filtration systems using membranes and deionizers, which combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a number of wastewater treatment systems, including biochemical treatment systems that...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals solutions for electronics industry

    In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Online monitoring solutions for fast determination of oxygen in wet chlorine

    The purpose of fast determination of oxygen in wet chlorine is twofold: verification and control of membrane oxygen permeation, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Wastewater evaporator Solutions for the reverse osmosis reject/concentrate

    It may seem paradoxical, but processes used to clean water actually also create wastewater. Reverse Osmosis creates clean water by forcing the water through a semipermeable membrane that filters out many moleclues. The problem is with the water that`s left, that does not pass through the membrane, which has an extremely high concentration of salts and minerals. This water is called RO reject or reverse osmosis concentrate. Reverse Osmosis reject can sometimes equal as much as half the volume of the original feed...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Cleaners for Oil & gas industry

    IPC’s cleaners are used throughout the oil and gas industry for cleaning equipment and filter membranes. They are excellent alternatives to hazardous, solvent based degreasers. Our cleaners remove oils and greases, sludge, mud, cutting fluids, flux, and petroleum residues. Clean equipment helps to ensure that operations run smoothly and efficiently.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for industrial Manufacturing industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Pharmaceuticals & biotechnology industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven effective in critical cleaning applications including mixing tanks, tablet presses, fluid lines, batch process tanks, filter membranes, and other equipment. An economical 1-2% concentration in water is effective in removing gels, emulsifiers, oils, titanium dioxides, dyes, silicons, fragrances, petrolatum, paraffins, insoluble salts, oxides, blood and proteins.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex...

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Usage

    TDA Aerator diffuser can be used in aerobe and an-aerobe phase of (waste-) water treatment(wwtp) at all sort of industries. Ideal for biological treatment aeration and reliable for the treatment of industrial wastewater or sewage water. the perforated surface of the membrane sleeve makes tube diffusers a perfect solution for all types of chambers and applications. The exhalation of air through the bottom grooves decreases the depositing of activated sludge underneath the ventilation which means less cleaning...

    By Biomicrobe Technology based in Jakarta, INDONESIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you