Only show results available in Virginia? Ok

membrane filtration Applications

  • Membrane filtration systems for milk

    Since the introduction of membrane processing to the dairy industry in the late 1960`s, separation of dairy fluids using semi-permeable membranes has been used to clarify, concentrate and fractionate a variety of dairy products. The time honored and tested applications involving whey processing, the by-product of cheese making, have introduced a plethora of refined proteins and commercial uses for a once wasted by-product. The membrane applications for fluid milk have been understood for as long as the whey applications but have been underutilized in commercial applications.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Membrane filtration systems for whey

    Before the innovation of membrane processing was introduced to the dairy industry, in the late 1960`s, whey was truly a waste product of cheese making. Three important events have driven whey towards further processing; increased cost of dumping whey into the environment; new technologies to separate the proteins in whey and scientific research that has uncovered the wide range of nutritional and biological properties of whey that have ultimately added value to a once wasted product.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Membrane filtration systems for biotechnology and pharmaceutical industry

    GEA Filtration is experienced in processing a wide range of products on a commercial basis and by testing products at the plant site or in our pilot plant testing facility. Definition of the Industrial Biotech and Environmental Biotech Sector. This sector uses living organisms to manufacture a variety of products that result in the reduction of pollution, resource consumption and waste. Typical products include bioethanol, industrial enzymes, biological fuel cells, enzymes for bioremediation, biodegradable plastics and much more.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Membrane filtration systems for cheese brine clarification

    Salt brine is used to cure many different varieties of cheese. Disposal of salt brine is expensive and often prohibited due to high salt content. Ultrafiltration rejects the fats and proteins that are expelled from cheese into the brine and allows continuous re-use of salt brine baths.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning chemical consumption.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Membrane filtration systems for food and beverage industry

    The product knowledge we gained by this experience is indicated by the following list of products suitable for processing on a GEA Filtration membrane filtration system. These systems include microfiltration, ultrafiltration, nanofiltration, and reverse osmosis with either spiral-wound, stainless steel, ceramic, tubular, or plate-and-frame configurations.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Industrial Water Filtration

    QUA is a leading-edge developer and manufacturer of advanced membrane products, that are engineered with innovative technologies, and are used to treat challenging waters.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Particle filtration for the chemical industry

    In chemical and biotechnological applications, ceramic membranes ensure protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more. 

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Particle filtration for the food industry

    In chemical and biotechnological applications, ceramic membranes ensure protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more. 

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Chemical filtration in water for the wastewater industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Chemical filtration in lacquers for the recycling industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has also invested to another modern producing plant in Shanghai for ceramic membranes production,with a whole set of equipment like Vacuum Pugmill, Extruder, Oven, Full Automatic High Temperature Furnace, and Testing Machines. All raw material is high quality from domestic and abroad porus ceramic membrane filter with first grade quality could be manufactured under our unique technic and strict quality control system.

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • Premium

    Filtration solutions for pre-treatment for desalination industry

    In desalination plants it is of great importance for the operation of the entire plant that the pre-treatment of the water is good before the salt is to be removed. For reverse osmosis (RO) desalination plants a good pre-treatment is essential for avoiding membrane fouling, resulting in reduced water production and increased operational costs.

    By Filtralite Saint-Gobain Byggevarer As based in Alnabru, NORWAY.

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • CeraQ - Ceramic Membrane Modules

    QUA’s CeraQ ceramic membrane modules are designed for challenging water and wastewater applications. The CeraQ modules consist of 3.5 mm ID ceramic tubular elements potted into bundles for various surface area requirements. The module is capable of removing virus, bacteria, colloidal matter, submicron or micron sized suspended particles, oil and organics from a wide range of fluids, including drinking water and industrial wastewater to economically meet variety of treatment objectives or to recycle and reuse wastewater. One of CeraQ's applications is that drinking water filtration for removal of bacteria/virus. achieves 10-log bacteria and 4-log virus removal.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you