Only show results available in Virginia? Ok

metal recycling equipment Applications

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Metal recycling equipment for Casting iron process

    Particle shape cast iron powder can be cold pressed to cylindrical briquettes by SBJ series briquetting press, to a density of 5.5~6ton/m3 (adhesion agent is not used) and the production could be 8~20 tons per shift. The machine is vertical structure with upper and lower beams made of cast steel. The whole working process is automatic (PLC controlled). It also can be equipped with different cooling system.

    By Jiangyin Metallurgy Hydraulic Machinery Factory based in Jiangyin City, CHINA.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Metal recycling equipment for Aluminum processing industry

    Jiangyin Hydraulic devoted to offer solution for the biggest apple aluminium products manufacturer, FOxcnn for over 8 years. And designed various systems to help collect every drop of values from Aluminium wastes. In 2016 ,Jiangyin Hydraulic built another production line with functions of waste lifting, crushing, spin-drying, briqutting,liquid collecting system and win Foxcnn’s another admiration. We design and build this system in only 55 days and make the system fully integrated into a 4mx5m area...

    By Jiangyin Metallurgy Hydraulic Machinery Factory based in Jiangyin City, CHINA.

  • Premium

    Metals separation equipment for cleaning metal pollutants for metal shredding industry

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from metal shredding.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Recycling and Washing Equipment for Aluminum Smelters

    Recognized worldwide for its expertise in electricity, the province of Quebec is also the birthplace of the top aluminum smelting operations on the planet.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Recycling Solutions for the metals industry

    ANDRITZ METALS – highest quality in metalforming technology. Complete lines for the production and further processing of cold-rolled carbon steel, stainless steel, and non-ferrous metal strip. ANDRITZ METALS provides solutions for lines to produce steel and other metal strips. These lines consist of equipment for pickling, cold rolling, annealing, heat treatment, strip coating and finishing, and for pickling acid regeneration. Additionally, ANDRITZ METALS supplies turnkey industrial furnace systems for...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Premium

    Metals separation equipments for cleaning metal pollutants for glass industry

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from glass.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue)...

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredding of swarf recycling with Mercodor equipment

    For the optimal processing and reduction of steel and stainless steel chips, cast, aluminium, copper, brass, titanium and precious metal turnings, for instance, Mercodor, with its rugged, compact precision cutters has the right solution for each and every task.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators. Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez...

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Air pollution control (APC) equipments for metal industry

    In the production of metals from ore or recycled products there are many processes where pollutants form. Smelters require high amount of energy and depending on the source of this energy and where production takes place, energy consumption can also contribute to the amount of pollution in your flue gas. In processes for metals, the metal should be purified from unwanted materials. It is inevitable that these materials as well as small amounts of the metals end up in the flue gas. Our technology is unique in its...

    By Envibat AB based in SkellefteƄ, SWEDEN.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Systems for the scrap metal industry

    From small recycling yards to huge regional processors, every scrap yard has a different mix of materials, volumes and demand cycles. And your equipment collection should be precisely prescribed to match. Having the right stable of balers, shears, wire strippers, choppers, shredders and other assets is crucial to running a perfect processor. Ensuring you can scale up through growth and expansion is even more critical to your future success. OBC has maintained many long-term relationships with scrap metal processors...

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Air pollution control (APC) equipments for waste incineration

    Waste incineration is a complex area. The mix of waste, moisture content, temperature of the waste, surrounding air and a variety of other factors interact and affect which residues are formed. Combustion entails often a gas consisting of heavy metals, sulfur oxides, chlorides, dioxins, etc. It is extremely important with a proper handling of the gas and the task often requires a mixture of wet and semi-dry treatment. EnviBAT offers equipment that brings particle levels down to extremely low levels, which guarantee...

    By Envibat AB based in SkellefteƄ, SWEDEN.

  • Magnets for the recycling industry

    Master Magnets equipment is used in many recycling applications such as the recycling of automobiles, electrical goods, skip waste, domestic waste, in fact wherever there is a need to separate metals from other materials.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you