Only show results available in Virginia? Ok

metal separation system Applications

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Industrial shredders system for metal shredding sector

    Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Metal Sorting - Electronic Scrap Sorting

    The recycling of disused and obsolete electrical and electronic equipment is gaining more and more importance world-wide. Waste electrical equipment is an incredibly rewarding source of raw materials. In Waste electrical equipment, up to hundreds of times more precious metals can be found per ton of material than in the primary source of raw material, ore. The goal for TITECH and the industry as a whole is to utilise electronic scrap recycling and sort out pollutants on one hand and profitable components in high purity on the other. For electronic recycling purposes, the EU classifies W??? into 10 categories. After separate collection of TVs, fridges and so on, they are processed and sorted in electronic scrap recycling systems. The average content of thus gained materials is as follows: metals (50%), plastics (30%), glass (10%) and other materials (10%).

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Industrial Meshes for Precoat Filtration / Precoat Filter Systems

    SolidWEAVE metal wire mesh has been used successfully for decades in systems for precoat filtration. High-tensile mesh constructions made of PZ-Microdur, KPZ-Microdur, YMAX® and Plain Dutch Weave form the basis for the long and trouble-free operation of precoat filter systems because they were specifically designed for the high mechanical demands of precoat filters.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Recycling of Incinerator Slag

    Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Waste Sorting - Commercial Waste Sorting / Industrial Waste Sorting

    Traditional manual or semi-automated techniques, however, are only able to recover low levels of separate materials from commercial and industrial waste streams. In contrast, TOMRA’s fully adjustable, state-of-the-art, senor-based sorting and recycling systems convert complex and varied commercial and industrial streams into high quality, separated output. The systems also make manual picking unnecessary, thus reducing labor costs and material loss, while increasing the efficiency of commercial waste recycling. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), visual spectrometers (VIS), color line cameras and metal sensors in combination, the systems offer: - High recovery rates - High throughputs - High purity levels - Speedy return on investment - Low running costs - Advanced recognition capabilities (material, color, atomic density etc)

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Mixed Municipal Solid Waste Sorting

    Traditional (manual) or semi-automated techniques, however, are only able to recover low levels of separate materials from mixed municipal waste streams and mean considerable content going to landfill. In contrast, TOMRA Sorting’s fully automated, state-of-the-art, sensor-based municipal sorting systems convert complex and varied - even dirty - municipal solid waste streams into high quality, separated, marketable output. The systems also make manual sorting unnecessary, thus reducing labor costs and material loss, while increasing efficiency. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), color line cameras and metal sensors in combination.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Construction and Demolition Waste

    M&K plants divert Construction and Demolition waste from landfill by separating the waste into materials such as Hardcore, Soils, Wood(s), Metals, Stone, Cardboard, Paper and Plastic at the lowest possible cost per ton. M&K Construction and Demolition Waste Recycling Systems combine manual as well as automated sorting with the latest in feeding, screening & separation technology, allowing contractors to efficiently separate, sort and recover a wide variety of material types. What is Construction and Demolition Waste? C&D Waste is typically collected in open skip bins from construction or demolition sites. https://the-mkgroup.com/portfolio/construction-and-demolition-waste

    By MK Group based in Galbally, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you