Only show results available in Virginia? Ok

metal sorting Applications

  • Premium

    Metal sorting for the metal recycling industry

    Metals can be identified according to the colour, nature of the metal and of elemental composition.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling sorting solutions for the wire recovery

    Previously, cable and wire materials were often lost in the treatment and sorting process, resulting in a financial loss due to the high proportion of copper they contain. TOMRA sorting technologies are capable of detecting these wires, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    On-site analysis of scrap metal for sorting in the metal recyling industry

    Scrap metal sorting requires fast, accurate, on-site analysis. To achieve maximum price for the scrap, analysis for both incoming and outgoing scrap is required. X-ray Fluorescence (XRF) analysis is widely used within the scrap metal sorting and recycling industry to achieve highest efficiency, most consistent product and best price and all this through Non-Destructive Testing.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the zorba - shredded non-ferrous metals

    The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Pre-sorted Material Sorting

    TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material. In the bottle-to-bottle procedures highest and consistent quality standards are required.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Rubber Tire Recycling

    As we known, the black pollution- tires cover all over the world and it is growing at one billion waste tire every year. It does damage to the environment. The traditional disposal method of waste tire is to burn or pile up outdoor for a long time, but whether burning or piling up, waste tire would take up a lot of land and cause new pollution during waste tires. So we need to recycle waste tires. Rubber tire recycling machine can crush waste rubber into chip. The finial rubber granules can be made into rubber pipe, conveyor belt, rubber floor tile. Tire Recycling line is adopting physical recycling method and is suitable for our company develop and produce a waste tire and rubber recycling equipment, mainly is suitable for the grinding, wire tire, steel wire ties and all sorts of waste rubber products. This waste tire recycling plant running in normal temperature, no need to add any other chemicals, no pollution to the environment.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Glass sorting for the glass recycling industry

    Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colors.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling sorting solutions for the ash recycling

    Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Automotive Shredder Residue Drying

    Getting economic value from landfill waste like automotive shredder residue (ASR) is a big challenge that can have a big payoff. Vulcan® Systems Drying Technology is the key component of material preparation when separating ASR waste to reclaim energy and metals. Vulcan® ASR Dryer Systems are manufactured to suit each client’s individual project needs and custom-designed specifically to dry ASR, making the material easy to transport, separate, and handle. This drying system consists of a drum with a burner that is mounted to a combustion chamber. Shredder residue is fed into the rotary dryer. After passing through the system, the dried material is discharged to a transfer conveyor for further sorting and separation. The vapor from the process is pulled through a cyclone that is specifically designed to deal with the fine ASR dust, as well as a high-temperature baghouse that removes additional fine particulates from the vapor stream.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Waste sorting solutions for the municipal solid waste (msw)

    Municipal solid waste (MSW) contains recyclable fractions, such as plastics, mixed paper, cardboard, and metals. The demand for these materials is rising, compared with that for primary resources.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Wood shredding

    SSI Shredders and Reducers are an effective solution for high capacity primary processing of mixed wood for metal liberation and recovery, or bulky item reduction. SSI Shredding Systems has a number of customers processing large wooden items. PRI-MAX reducers are ideal machines to turn mixed, bulky wood waste into “floable” material streams that can be sorted and converted into usable products or energy sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Construction and Demolition Waste

    M&K plants divert Construction and Demolition waste from landfill by separating the waste into materials such as Hardcore, Soils, Wood(s), Metals, Stone, Cardboard, Paper and Plastic at the lowest possible cost per ton. M&K Construction and Demolition Waste Recycling Systems combine manual as well as automated sorting with the latest in feeding, screening & separation technology, allowing contractors to efficiently separate, sort and recover a wide variety of material types. What is Construction and Demolition Waste? C&D Waste is typically collected in open skip bins from construction or demolition sites. https://the-mkgroup.com/portfolio/construction-and-demolition-waste

    By MK Group based in Galbally, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you