Only show results in Virginia? Ok

metals in wastewater Applications

  • Wastewater treatment for the metal industry

    Wastewater and process water treatment in the metal industry. Industrial waste water or circuit water in the metal industry can be broken down into many comprehensive, subject-specific areas. AWAS has developed various methods of treatment technology for the metal industry in the last 30 years. Generally we accept any environmental challenge and like to respond to individual problems.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Metal finishing wastewater solution

    Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Wastewater treatment for the metallurgic industry

    Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very important.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Detection of specific heavy metal content in water

    Detection of heavy metal concentration in water, sea water, environmental waters and pre-treated waste water to low PPB levels using a hand held fluorimeter. Test results acquired within one minute. Technology uses DNAzyme based fluorimetric detection.

    By ANDalyze, Inc. based in Champaign, ILLINOIS (USA).

  • Wastewater treatment solutions for mining and primary metals industry

    Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove suspended solids and in particular heavy metals (SS), arsenic and other contaminants for safe discharge into sensitive environment.

    By IDRAFLOT based in Zoppola, ITALY.

  • Premium

    Industrial wastewater solutions for electroplating wastewater

    Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well exceeded? A horror scenario resulting in a lot of stress, work and expense.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Industrial wastewater solutions for vibratory grinding wastewater

    Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial...

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Wastewater evaporator Solutions for the electronics manufacturing wastewater management

    Assembly of many electronic components involves multiple washing processes to remove residue, oil, acids and other lubricants and contaminants before during and following various process steps. This generates large volumes of wastewater containing alkaline, acid solutions, heavy metal wastewaters, paint, plating residue wastewater, and other metal fabrication wastewaters. Polishing, grinding and dicing operations in semiconductor manufacturing produce wastewater high in suspended solids, including silica,...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Premium

    Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Industrial wastewater solutions for crack detection wastewater

    Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using...

    By H2O GmbH based in Steinen, GERMANY.

  • Industrial Engineered Plastic for the Wastewater Industry

    Over the past decade, Diversified Plastics has become a leading provider of sprockets and other plastic components to the wastewater industry. This is, in part, because many treatment facilities are moving away from metal and toward plastic components. Plastic components are much lighter than steel, reducing shipping costs and making them far easier and less labor-intensive to install. Plastic components are as or more durable than steel and reduce friction, which lengthens the life of the mating components and...

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    ADVANCEES - Application : High TDS Reduction

    There are potential health effects caused due to high TDS content in drinking water. The hard water will taste bitter, salty, or metallic and may have unpleasant odors. ADVANCEES can help you to solved this issue. Check out our solution www.advancees.com

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Treatment of Municipal Water

    TIGG specializes in providing equipment and services for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market using activated carbon and other media. In addition to treatment systems for the municipal water market, TIGG can design and fabricate tanks for surge protection and emergency water storage.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of aluminium in water by fluorimetric method

    Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Industrial Meshes for Distillation

    In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you