Only show results available in Virginia? Ok

metals in wastewater Applications

  • Metal finishing wastewater solution

    Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater....

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Detection of specific heavy metal content in water

    Detection of heavy metal concentration in water, sea water, environmental waters and pre-treated waste water to low PPB levels using a hand held fluorimeter. Test results acquired within one minute. Technology uses DNAzyme based fluorimetric detection.

    By ANDalyze, Inc. based in Champaign, ILLINOIS (USA).

  • Premium

    Industrial wastewater solutions for electroplating wastewater

    Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well exceeded? A horror scenario resulting in a lot of stress, work and expense.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Industrial wastewater solutions for vibratory grinding wastewater

    Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial...

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Wastewater evaporator Solutions for the electronics manufacturing wastewater management

    Assembly of many electronic components involves multiple washing processes to remove residue, oil, acids and other lubricants and contaminants before during and following various process steps. This generates large volumes of wastewater containing alkaline, acid solutions, heavy metal wastewaters, paint, plating residue wastewater, and other metal fabrication wastewaters. Polishing, grinding and dicing operations in semiconductor manufacturing produce wastewater high in suspended solids, including silica,...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Industrial Engineered Plastic for the Wastewater Industry

    Over the past decade, Diversified Plastics has become a leading provider of sprockets and other plastic components to the wastewater industry. This is, in part, because many treatment facilities are moving away from metal and toward plastic components.

    • Plastic components are much lighter than steel, reducing shipping costs and making them far easier and less labor-intensive to install.
    • Plastic components are as or more durable than steel and reduce friction, which lengthens the life of...

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • Premium

    ADVANCEES - Application : High TDS Reduction

    There are potential health effects caused due to high TDS content in drinking water. The hard water will taste bitter, salty, or metallic and may have unpleasant odors. ADVANCEES can help you to solved this issue. Check out our solution www.advancees.com

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Treatment of Municipal Water

    TIGG specializes in providing equipment and services for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market using activated carbon and other media. In addition to treatment systems for the municipal water market, TIGG can design and fabricate tanks for surge protection and emergency water storage.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of aluminium in water by fluorimetric method

    Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you