Only show results available in Virginia? Ok

methane measuring Applications

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane hydrocarbons that are of primary concern.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Methane and Carbon Dioxide Sensing for Biogas Applications

    Application: Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane, and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Measurement solution for soil chamber gas flux

    Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY.

  • Premium

    Gas monitoring instruments and systems for greenhouse gas emissions from soil

    Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Oxygen monitoring from aerobic and anaerobic for biodegradation tests

    Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.

    By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).

  • Premium

    High quality gas sensor solutions for mining

    Fast, accurate and reliable measurement of CH4. The extraction of coal releases methane gas, which can mix with the air in a mine to form a hazard due to its flammability. Ventilation with fresh air from the surface is used to dilute the methane and reduce the risk of explosion. Monitoring of the methane content of the stale air exiting the mine allows the amount of ventilation to be controlled. Although our sensors are not ATEX approved for use in potentially explosive atmospheres they are suitable for monitoring air containing methane concentrations below the lower explosive limit. Our OEM products can be built into equipment which is approved for use in the monitoring of mine exhaust gas and similar applications.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for biogas

    Fast, accurate and reliable measurement of CO2 and CH4 concentration. Methane and CO2 concentration measurements are a key part of the evaluation of the anaerobic digestion process. Too high or too low gas concentration levels can indicate a change in the efficiency of the fermentation process. AD process control systems measure the Methane content (and often the CO2 content) of the gas stream to control or evaluate the AD process and warn of problems. Edinburgh Sensors provide high performance OEM gas detectors that are able to give fast, accurate and reliable measurements of both CO2 and Methane concentrations.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you