Only show results available in Virginia? Ok

microbial detection Applications

  • Microbial testing for metalworking fluids industry

    Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection and treatment. Rapid detection is now possible through LuminUltra’s Quench-Gone Organic Modified (QGO-M) ATP test kit. This advanced test kit provides the user with an accurate measure of total microbial content in any metalworking fluid in less than 5 minutes.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in food & beverage industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water treatment and distribution systems used in the food and beverage industry, and aids with disinfection practices and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in food & beverage water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help save time & money and reduce risk in industrial process water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in upstream oil & gas industry

    On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators and storage tanks and bullets. The best solution to these problems is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for biological wastewater treatment industry

    Realize a new level of process stability and efficiency! Wastewater operators have traditionally had no choice but to rely on TSS or VSS measurements to quantify biomass in their process. These measurements detect much more than just living biomass and therefore are inaccurate and unresponsive indicators of the living population.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for liquid fuel handling sector

    On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring

    The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol.

    Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before the results are known. Biofouling can be well-advanced before treatment begins. In addition, it is believed that this technique does not detect the full range of microbial life present in cooling systems.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you