Only show results available in Virginia? Ok

microbial testing Applications

  • Microbial testing for metalworking fluids industry

    Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection and treatment. Rapid detection is now possible through LuminUltra’s Quench-Gone Organic Modified (QGO-M) ATP test kit. This advanced test kit provides the user with an accurate measure of total microbial content in any metalworking fluid in less than 5 minutes.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in food & beverage industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water treatment and distribution systems used in the food and beverage industry, and aids with disinfection practices and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in food & beverage water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help save time & money and reduce risk in industrial process water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in upstream oil & gas industry

    On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators and storage tanks and bullets. The best solution to these problems is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for liquid fuel handling sector

    On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for personal care products sector

    The Problem: Microorganisms. personalcareMicrobiological contamination is a threat to product quality and process integrity in the personal care products and life sciences manufacturing industries – the purity of raw materials including water is essential to ensure manufacturing compliance. Microorganisms may be introduced at several stages of the process; subsequently, manufacturers must put in place stringent Quality Assurance / Quality Control (QA/QC) programs to manage microbiological contamination.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for biological wastewater treatment industry

    Realize a new level of process stability and efficiency! Wastewater operators have traditionally had no choice but to rely on TSS or VSS measurements to quantify biomass in their process. These measurements detect much more than just living biomass and therefore are inaccurate and unresponsive indicators of the living population.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial Solutions for Wastewater Treatment

    Whether industrial or municipal, Microbial Discovery Groups proprietary platforms address the variety of challenges associated with wastewater treatment. Too many failures in the bioaugmentation industry stem from focusing on the product, rather than understanding and complementing wastewater systems and operations. MDG will work with you to provide customized system surveys, sampling and testing results, return on investment proposals, and regular monitoring programs specific to your end user customer. We will show you how to measure success and provide sustainable turnkey solutions for your client.

    By Microbial Discovery Group (MDG) based in Franklin, WISCONSIN (USA).

  • Premium

    ph determination for soil testing

    Determination of the pH value provides information about the acid or base action of the soil solution. This in turn is enormously important for the nutrient supply and microbial activity of the soil. For example, many metals (trace elements) are considerably more mobile in acidic soils. If the soil pH values are very low, toxic levels can soon be reached and these can damage the roots of plants. On the other hand, excessively high pH values quickly lead to a shortage of trace elements because of immobilization.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you