Only show results available in Virginia? Ok

nitrogen oxide emissions Applications

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Nitric Acid Production Emissions Analysis

    The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg.  The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • PLAZKAT systems for treatment of emissions from motor and railroad vehicles

    PLAZKAT Aero systems are used to treat emissions from motor and railroad vehicles. It has been found that exhaust gases from internal combustion engines (ICE) contain over 250 ingredients. Major components include carbon oxides, nitrogen oxides and hydrocarbons.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for nitric acid process

    Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective Catalytic Reduction unit (SCR), which deploys ammonia gas NH3 to limit emissions of NO and NO2. A modern nitric acid plant needs to monitor the emissions of these gases.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you