Only show results available in Virginia? Ok

no-analyzer Applications

  • Premium

    Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for medical applications

    Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO MEDICS.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Oxygen Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the Lyssy product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Chemiluminescense based analyzer for semiconductor applications

    NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential. This approach is used successfully in manufacturing and development lines worldwide, since 1996.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for coil coating industry

    Coil Coating is a high-temperature solvent vapor monitoring application in which rolls of aluminum or steel are coated with a color finish, oven cured to desired specs and sold to makers of cans, rain gutters, home appliances, building & automotive products and other fabrications. Coil coating requires the use of our PrevEx Flammability Analyzers to monitor the flammability of the solvent vapor driven off during the drying process. PrevEx analyzers accurately measure solvent mixtures and can withstand the temperatures required to prevent sample clogging in coil coating plants.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for processing ovens & dryers

    Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to rise above safe levels, creating a potentially explosive mixture of vapor in air.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Chemiluminescense based analyzer for automotive applications

    Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Headspace Gas Analyzers for Food & Pharmaceutical Industry

    Carbon dioxide and oxygen headspace analysis for food and pharmaceutical applications. To ensure product packaging integrity and shelf life, many food and pharmaceutical products are packaged using MAP Modified Atmosphere Packaging.  Systech Illinois headspace gas analyzers offers fast, accurate MAP analysis of headspace in gas flushed food and pharmaceutical products.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    NO2 analyzer - For Medical Application

    The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. For more information on how this unique analyzer, contact Environnement S.A.

    By Environnement S.A based in Poissy, FRANCE.

  • Premium

    Insitu Flue Gas Desulfurization - DeSOx Analyzer

    The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Testing linearity of Air quality analyzers

    To test gas analyzers for Air Quality monitoring, gas references must have concentration in the range of hundreds to tenths ppb. Test gas bottles with so small concentrations are expensive and unstable. With the gas divider BetaCAP30X100 it's possible to dilute high concentration test gases getting 30 dilution steps in the range from 1:100 to 1:3.000 of the original test gas bottle concentration. Traditionally MFC based diluters are used for this application, but now our capillaries based diluter is available, with more stable performances.

    By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY.

  • Chemical Oxygen Demand (COD) Analyzer for Food & Beverage Industry

    Real Time Chemical Oxygen Demand Improves Wastewater Management. MANTECH’s PeCOD Analyzer water quality analysis technology provides food and beverage processors with accurate, real time data that enables them to make timely decisions and effectively manage their water and wastewater. The PeCOD Analyzer is a fast, green, accurate alternative to traditional chemical oxygen demand (COD) and biological oxygen demand (BOD) testing for measuring organics in wastewater. Rapid, reliable and economical testing helps companies remain in compliance with their permits and respond quickly when they are not.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • NOx analyzers for Automotive Mobile Sources

    NOx analyzers for transportation industry exhaust emissions. Options include a heated sample inlet for hot, moist engine exhaust, and AK protocol. View Automotive/Mobile Source Products

    By ECO PHYSICS INC. based in Ann Arbor, MICHIGAN (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Pulp & Paper Industry

    PeCOD Analyzer Improves Pulp Mill Performance, Reduces Wastewater Pollution. MANTECH’s PeCOD technology is a safe and effective solution for improving wastewater treatment and optimizing the use of chemicals in pulp and paper mills.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Gas detection analyzers for solvent based printing industry

    Solvent based inks in different colors and patterns are applied to paper, plastic, film and foil substrates. Finished products include all sorts of wrapping paper, wall covering, candy wrappers, flexible food packages, shrink labels, high quality magazines and many, many more. These industries employ ovens or dryers to remove the solvents from the finished product.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you