Only show results available in Virginia? Ok

nox emissions monitoring Applications

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Continuous emissions monitoring for glass manufacturing industries

    Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and others.

    By Opsis AB based in Furulund, SWEDEN.

  • Marine emissions monitoring

    In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines for failing to meet these new requirements on the “polluter pays” principle.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Process monitoring solutions for NH3 truck engine monitoring

    A new EC regulation states that  diesel engines need to have active cleaning with urea injection in order to reduce NOx emissions. In order to control the urea dosage, a reliable measurement system is required. OPSIS LD500 laser diode gas analyser for monitoring ammonia (NH3), has been tested and approved by German TÜV, in accordance with the EURO VI standard.

    By Opsis AB based in Furulund, SWEDEN.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for pulp & paper

    Measurement of particulates, SO2, NOX, TRS and greenhouse gas emissions from the Pulp & Paper industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for aluminium industry

    Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Environmental monitoring solution for cement industry

    Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Gas monitoring during industrial process

    EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Gas monitoring instruments and systems for nitric acid process

    Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective Catalytic Reduction unit (SCR), which deploys ammonia gas NH3 to limit emissions of NO and NO2. A modern nitric acid plant needs to monitor the emissions of these gases.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you