odorous air Applications

AgriAir purifiers will rid the air of volatile organic substances that may be associated with indoor growing operations. Our line of air purifiers is designed to remove odors and sanitize the air by destroying contaminants at the source, not masking them. Available in a variety of models that are designed to suit any commercial operation. Large or small-scale grow, AgriAir has a purifier designed to meet your garden’s demands.Indoor cultivation always gives the grower the upper hand. In indoor growing, you have the full control of the environment for your plants. Light, water, nutrients, temperature and humidity can all be controlled. However, you also need to control the odor of plants growing indoors.

By AgriAir Equipment - a brand by Omnitec Design based in Mukilteo, WASHINGTON (USA).

We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

By The Definitive Deodorant Company based in North Kansas City, MISSOURI (USA).

Tobacco produces a strong, characteristic smell. The process airflow from the tobacco industry mainly comes from drying the tobacco leaves. Through central air exhaust systems, all air submitted from the drying process is blown outside. Because this is a very large waste airflow, odour nuisance in the neighbourhood is likely.

By Aerox B.V. based in Vleuten, NETHERLANDS.

A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA).

Th turn key plant is composed by three different wet stages. The first stage is a venturi jet scrubber to collect dust and particles, then the second and third stages are deputed to absorb bad smells, such as H2S, Ammonia and Ammines. The absorption takes place thanks to the injection of chemicals (such as Sulphuric Acid, Sodium Hypochlorite and Sodium hydroxide.

By F.G.M. engineering srl based in Santa Croce sull`Arno, ITALY.

You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

In many different industries manufacturing processes cause offensive odours in the process air. The Aerox-Injector can be the perfect solution to bring back emission of odours to a minimum.

By Aerox B.V. based in Vleuten, NETHERLANDS.

Malodors can commonly be the by-prodcut of many industrial and manufacturing processes. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the petro-chemical industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public communities which surround these plants.

By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

By Chromatotec Group based in Val de Virvée, FRANCE.

Citto Activated Carbon 'Air Series' offers a range of standard, impregnated, and specialized activated carbon products for a wide spectrum of air purification applications. The dynamic product array of the Citto Activated Carbon 'Air Series' is developed to meet stringent emission control regulations as well as safety standards for emerging respiratory technologies effectively removing nuisance odors, volatile organics, and hazardous chemicals from air and gas streams.

By Citto Corporation based in TORONTO, ONTARIO (CANADA).

In the Fish feed process the product is usually conducted to the dryer through pneumatic transport, after which it falls out from the dryer into the cooler. Odour sources in this process are the flash- off of the extruder, transport air, dryer air and possibly also air from the cooler.

The amount of air per line that is emitted and should be deodorized depends amongst others of the type of dryers/coolers (vertical or horizontal), but also whether air is recycled from cooler to the dryer.

One compact Aerox-Injector can treat the total amount of air coming from a complete production line at all times. In many cases it is even possible to treat combined airflows of multiple production lines with one Aerox-Injector!

We are happy to advise you what (cost) technically will be the best solution. The Aerox-Injection technology prevents pollution of the Aerox-Injector by dust or greasy air in this process. This will guarantee the performance and will keep your neighbours really satisfied.

By Aerox B.V. based in Vleuten, NETHERLANDS.

Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Will eliminate odors associated with cigarette smoke in homes, businesses, warehouses, cars, hotels, and restaurants.

By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

Carbon Activated Corporation supplies a complete line of high-capacity activated carbon for vapor phase and air applications such as odor control in municipal waste-water facilities, landfills and refineries, SVE (soil vapor extraction) projects and many other vapor related applications. We manufacture specialized carbon both impregnated and non-impregnated for applications such as H2S removal and the removal of any time of noxious gases.

By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).

Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers generate ionized-hydro-peroxides, which result in a proactive method of indoor air sanitation and promote organic garden production. This purification method eliminates the need for the use of additional chemicals or biocides that generally contain toxic compounds. AgriAir products can safely be used in occupied spaces throughout the entire grow cycle all while effectively destroying mold spores and other harmful bio-contaminants.

By AgriAir Equipment - a brand by Omnitec Design based in Mukilteo, WASHINGTON (USA).

Ozone Generators and Hydroxyls Generators are used for odor elimination, odor control, air purification and to improve indoor air quality. Applications include hospitals, doctors offices, labs, waiting rooms, gyms, locker rooms, restoration clean up, mold remediation, bio-hazard cleanup, and many more. Our equipment will remove odors associated with smoke, household/cooking, mold, mildew, pets, off gassing, VOC, decomposition, and others.

By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).