Only show results available in Virginia? Ok

oil analysis Applications

  • Oil on Metals Analysis

    Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Gas Detection and Analysis Equipment for Oil and Gas Industry

    The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real concern.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • NAPL Fingerprinting Analysis

    Sitelab's mobile laboratory was used by a client at a former oil refinery in Kansas and at a large tank farm in Massachusetts. The UVF data was used to delineate and map subsurface plumes of NAPL. Oil samples were collected from monitoring wells and analyzed for their GRO/DRO or VPH/EPH content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Data analysis and visualization tools for petroleum exploration

    The oil and gas industries face the daunting challenge of finding new reservoirs while balancing increasing costs and limited available sources.  EnterVol for ArcGIS is the answer to this challenge. Field data in oil and gas exploration can be transformed into 3D volumetric models that ease interpretation and analysis. Leading to better informed decisions and decreased costs.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Premium

    On-site chemical analysis for the natural gas industry

    By Pollution Srl based in Budrio (Bologna), ITALY.

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Refineries & Refinery Emissions Monitoring & Analysis

    Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of applications.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Oil & Gas Exploration and Pipeline Imaging

    Exploration and Pipeline Imaging

    GeoVantage specializes in custom imaging of basins for oil & gas exploration for up to date assessment of drilling activity and logistics. Large tracks of land, at 6 inch or 1 foot resolution, ensure that exploration companies know exactly what is happening in key regions of their lease holds and even those surrounding.

    For pipelines, GeoVantage offers quick, efficient capture of intricate pipeline layouts across all of North America and other countries. To ensure timely service, both large and small captures can be collected by a large group of sensors deployed in multiple places.

    Oil and Gas Pipeline Imaging and Class Analysis

    GeoVantage works closely with firms that specialize in Oil and Gas Pipeline imaging and class analysis. GIS Data Specialists (GDS) is one of those firms. GDS is able to take the GeoVantage high resolution imagery and output the information needed to comply with regulatory or company requirements for reporting.



    By GeoVantage based in Peabody, MASSACHUSETTS (USA).

  • Premium

    Analysis of H2S, Mercaptans and/or THT in natural gas with energyMEDOR

    Context & Challenges How to analyze H2S, mercaptans and/or THT for detecting the odor of the gas with the ability to have total organic sulfur calculation in a metering station?

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Precision moisture analysis instruments for rapid moisture analysis for foods

    Optimize processes and deliver consistent quality. Maybe you’re serious about snacks. Or nuts about nuts. Maybe you’re all about oils. Or perhaps baked goods are your bread and butter. Whatever the case, you know that accurate moisture control is critical to the success of your food products. The Computrac® family of moisture analyzers will enable you to quickly obtain reliable, repeatable moisture content results, independent of operator skill.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Oil Forensics Applications

    Crude oils collected from different wells in Oklahoma were sent to Sitelab for analysis.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Precision moisture analysis instruments for moisture testing for in-service lubricants

    A Chemical-Free Alternative to Karl Fischer. Accurate control of moisture in lubricating oils is critical to keeping your most important machines in optimal condition, but historically there have been few good options for  measuring moisture content. The “crackle test” is easy, but not accurate enough to keep modern machines running at their best. Karl Fischer titration is very accurate, but difficult to use, expensive to operate, and requires hazardous chemical reagents.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Produced Water Analysis

    Sitelab's UVF-3100D is used to test crude oil in water collected from produced water treatment sites in Wyoming. Water was tested for it's GRO and DRO content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with fossil or biogenic products, we are your specialist when it comes to analyzing them in accordance with international standards.

    By Metrohm AG based in Herisau, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you