Only show results available in Virginia? Ok

oil analyzer Applications

  • NOx analyzers for Source Emissions

    NOx analyzers for measuring emissions from refineries, power generation, industrial processes and other sources, as well as for combustion research. View Source Emissions Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Oil on Metals Analysis

    Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Monitoring TPH in Produced Sand for Overboard Discharge

    Sitelab's TD-500D analyzer is used on offshore oil platforms to test TPH in produced sand. The sand is contaminated by crude oil and must be treated prior to overboard discharge in order to meet regulatory limits.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Raman Spectrometry for the Oil & Gas Industry

    Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

    New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    NAPL Fingerprinting Analysis

    Sitelab's mobile laboratory was used by a client at a former oil refinery in Kansas and at a large tank farm in Massachusetts. The UVF data was used to delineate and map subsurface plumes of NAPL. Oil samples were collected from monitoring wells and analyzed for their GRO/DRO or VPH/EPH content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Alkane (hydrocarbon) gas measurement for mudlogging in oil & gas drilling rigs

    The need for operator and maintainance intensive gas chromatograph (GC) analyzers was eliminated. Customer can now deploy all-optical, unattended sensor system for monitoring the composition of hydrocarbon gases (C1-C5) exiting the well bore which provides crucial information about the drilling formation that would save time and money.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Premium

    Crude Oil Applications in Canada

    Sitelab's UVF-3100D analyzer is used in Canada for sites contaminated with heavy crude oil and bitumen.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Production of high-accuracy ethanol calibration gas

    Fast and highly accurate analyzer system was needed for ethanol calibration gas standards. Precisive`s OXS-3100-HC configured for ethanol gas was selected due to its sub-ppm repeatability and high stability.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • ASTM Color (0-7) #3070

    ASTM color is an important product quality measurement for many refinery and petrochemical processes. The purpose of this application note is to determine ASTM (D1500) color with the ClearView db fiber optic photometer for real-time ASTM color measurement from 0-7. Quantify yellowness for product quality measurement for many refinery and petrochemical processes. Get results in real-time (seconds). Use for ASTM and other parameters in complex streams. Detect potential cross-over contamination in fill or supply lines in real-time. Gain significant improvements in process control. Guided Wave's in-process NIR analyzer will determine ASTM (D1500) color in real time helping operators improve process control 24/7.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly related to the wax formation and hence the Cloud Point. This note will discuss the use of Guided Wave hardware and software tools for the measurement of the Cloud Point of diesel fuel using fiber optic-based, near-infrared (NIR) spectroscopy. NIR can be applied in real time directly in process.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Analysis of H2S, Mercaptans and/or THT in natural gas with energyMEDOR

    Context & Challenges How to analyze H2S, mercaptans and/or THT for detecting the odor of the gas with the ability to have total organic sulfur calculation in a metering station?

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Octane Number of Gasoline using NIR Spectroscopy #3012

    When every second counts and performance is on the line Guided Wave's NIR analyzers allow for easy measurement of octane numbers in gasoline and refinery production units using fiber optic -based, near-infrared (NIR) spectroscopy. *Fast and reliable measurement of the octane number of gasoline (RON & MON). * Control gasoline production in real-time directly with in process monitoring. * Certify gasoline meets specification before release. *Gain significant improvements in process control. *Minimize the need for laboratory sample collection and the labor intensive "knock engine" method. The measurement of the octane number of gasoline using NIR spectroscopy is both fast and reliable utilizing Guided Wave analyzers. Results are available in real-time (seconds) for multiple parameters in complex streams. Request Application Note #3012

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Applications Testing PAHs in Soil

    Sitelab's UVF-3100D analyzer is used to test soils for polycyclic aromatic hydrocarbons. PAHs are abundant in coal tars, coal ash, creosote and fuel oils.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you