Oil Containment Applications | Environmental XPRT

Premium

Oil Spill Containment in water for the Oil Spill Industry

By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA).

Containment and recovery of oil spills for government agencies

By Canadyne Technologies Inc. based in Richmond, BRITISH COLUMBIA (CANADA).

100% Spill Containment

By Safe Drain Stormwater Holdings, Inc based in Oakdale, CALIFORNIA (USA).

Spill containment for oil & gas pads

Our SafeGuards line of containments are used extensively on Oil & Gas drilling and work over pads under frac tanks; fracking pumps; diesel pumps; light towers; Gen-Sets; chemical delivery trucks; tote and drum containment; emergency response needs; spill kits; fuel delivery tankers and virtually all other pad equipment.

By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

Geosynthetic Lining for Secondary Containment

GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

By CETCO based in Hoffman Estates, ILLINOIS (USA).

Containment and recovery of oil spills for the oil spill response industry

By Canadyne Technologies Inc. based in Richmond, BRITISH COLUMBIA (CANADA).

Spill containment for offshore drilling & exploration

The SafeGuards line of spill containment includes specialty berms developed specifically for offshore rig use. If you have a containment issue, we`ll work with you to solve that containment concern.

By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

Containment and recovery of oil spills for port authorities

By Canadyne Technologies Inc. based in Richmond, BRITISH COLUMBIA (CANADA).

Caustic, Sulfuric Acid & Bleach Double Wall Containment Tanks for On-site Processing

Our safe tank vessels are independently designed for each project and to the requirements required by th engineer. Chemicals we design HDLPE & XLPE (HDXLPE) vessels for include: Acetic Acid, Aluminum Sulfate, Ammonium Sulfate, Calcium Chloride, Ethylene Glycol, Ferric Chloride, Ferric Sulfate, Ferrous Sulfate, Hydrochloric Acid, Hydrofluoric Acid, Hydrofluosilicic Acid, Hydrogen Peroxide, Magnesium Chloride, Phosphoric Acid, Polymers (Deposition), Potassium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Surfactants & water.

By Sierra Sales Double Wall Plastic Tanks based in Perkasie, PENNSYLVANIA (USA).

Oil spill recovery

As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic environment. In addition, we offer a range of ‘fail safe’ fire booms for use in controlled burning of oil in ice.

By DESMI A/S based in Noerresundby, DENMARK.

Premium

Drill Cuttings Plants For Oil and Gas Industry

Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM.

By econ industries services GmbH based in Starnberg, GERMANY.

Soil and groundwater protection in the petroleum industry

Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

Containers for solid hazardous materials

Bins for disposal of solid materials harmful to the environment such as cleaning rags and wipes, paints, granulates, binders for oil and chemical spills.

By P. Henkel GmbH based in Kreuztal, GERMANY.

Premium

Metal Sludge Plants for Oil and Metal Industry

Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

By econ industries services GmbH based in Starnberg, GERMANY.

Premium

Fly Ash - Industrial Vacuum

Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

Trivol 102 Regeneration

Trivol 102 Regeneration is a natural based absorbent that will soak up all hydrocarbon spills on land. We have super charged our product with millions of microbes that speed up the biodegradation process. Another special additive helps to naturally fertilize the soil to stimulate plant growth and further remediate the affected area. Trivol 102 Regeneration can be added to Trivol 101 Containment after it has been skimmed from water to dry ground.

By Ameret LLC based in Lenexa, MISSOURI (USA).

Oil skimmers for API separators industry

Ambar’s belt mop oil skimmer is ideal for the API separators because the mop can cover the entire width of the API thus giving the oil no place to hide. The recovered oil can gravity drain from the oil skimmer or it can be pumped to a near by oil storage container. The end result is recycled oil, improved efficiency and lower operating costs.

By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Premium

Fire detection solutions for the oil rigs

The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output in opacity which is transmitted to the rig safety systems.

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Premium

Sub-ppm Oil in Water Testing

InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Subscribe to our eBulletins

Add Supplier Profile