Only show results available in Virginia? Ok

oil-in-water analyzer Applications

  • Premium

    Water Analyzing for the Mining Industry

    As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • NOx analyzers for Source Emissions

    NOx analyzers for measuring emissions from refineries, power generation, industrial processes and other sources, as well as for combustion research. View Source Emissions Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Premium

    Oil on Metals Analysis

    Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Monitoring TPH in Produced Sand for Overboard Discharge

    Sitelab's TD-500D analyzer is used on offshore oil platforms to test TPH in produced sand. The sand is contaminated by crude oil and must be treated prior to overboard discharge in order to meet regulatory limits.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Raman Spectrometry for the Oil & Gas Industry

    Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

    New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    NAPL Fingerprinting Analysis

    Sitelab's mobile laboratory was used by a client at a former oil refinery in Kansas and at a large tank farm in Massachusetts. The UVF data was used to delineate and map subsurface plumes of NAPL. Oil samples were collected from monitoring wells and analyzed for their GRO/DRO or VPH/EPH content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Alkane (hydrocarbon) gas measurement for mudlogging in oil & gas drilling rigs

    The need for operator and maintainance intensive gas chromatograph (GC) analyzers was eliminated. Customer can now deploy all-optical, unattended sensor system for monitoring the composition of hydrocarbon gases (C1-C5) exiting the well bore which provides crucial information about the drilling formation that would save time and money.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Premium

    Crude Oil Applications in Canada

    Sitelab's UVF-3100D analyzer is used in Canada for sites contaminated with heavy crude oil and bitumen.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you