Only show results available in Connecticut? Ok

oil-in-water monitoring Applications

  • Premium

    UV fluorescence technology for Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings,...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer

    Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    UV fluorescence technology for Monitoring oil in power plant cooling water

    The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay set-point.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Machine condition monitoring for oil in water/soil

    Overview Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste streams.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated wastewater.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    UV fluorescence technology for Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Monitoring Oil and Grease in Wastewater

    Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR analyze

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • Instrumentation technologies for offshore industry

    Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables.

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.

  • Oil skimmers for montoring wells industry

    Ambar manufactures a specific oil skimmer for sub surface remediation where oil needs to be removed from ground water monitoring wells.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Water monitoring for the oil&gas industry

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you