Only show results in Virginia? Ok

oil-in-water testing Applications

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    pH determination for water testing

    By WTW - a xylem brand based in Weilheim, GERMANY.

  • Premium

    Water testing for laboratories

    By WTW - a xylem brand based in Weilheim, GERMANY.

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be determined by the Ryznar or Langlier indices and correlated to a conductivity or TDS range. Most people recognize problems associated with corrosion. Effects from scale deposits, however, are equally important. For example, as little as 1/8` of scale can reduce the efficiency of a boiler by 18% or a cooling tower heat exchanger by 40%!

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Monitoring of raw water intake

    The Situation:

    Hydrocarbons in municipal water supplies,  including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of hydrocarbons. Continuous monitoring of water source intakes can prevent system contamination and subsequent damage.  Accurate, low maintenance monitoring systems such as the TD-4100 XD and XDC have been protecting water intakes worldwide for over 20 years.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water Level Monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Premium

    Produced Water Analysis

    Sitelab's UVF-3100D is used to test crude oil in water collected from produced water treatment sites in Wyoming. Water was tested for it's GRO and DRO content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Water Quality Monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Drinking water solutions for the nitrate monitoring

    Problem: Nitrate, the most stable form of nitrogen in water, is found in both ground and surface water and originates from both natural and anthropogenic sources. Due to its high solubility in water, nitrate is not filtered out from groundwater like other contaminants. Removing nitrates from source water is important as elevated levels in drinking water can cause serious health effects when ingested.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Oil Forensics Applications

    Crude oils collected from different wells in Oklahoma were sent to Sitelab for analysis.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Quality control of oilseeds and pressed oil

    For the manufacturers of edible oils it is very important to control the crushing process at all the stages to achieve the best cost efficiency. In order to provide maximum yield and meet the product specifications it is necessary to monitor process as closely and rapidly as possible. Rapid determination of the key parameters with the use of InfraLUM® NIR analyzers provides the opportunity to control the process at every stage from quality control of oilseeds at intake point to the QC of the final product (liquid or solid). 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Electronic Bulk/ Domestic Water Meter

    ■■ EMS, Taiwan ■■ Intelligence Electronic Water Meter: - Class C Electronic Water Meter - Woltmann Electronic Water Meter - Multi-Jet Water Meter - Vortex Flow Meter - Magnetic Flow Meter - Ultrasonic Flow Meter - Gear Free - Magnet - Free - DMA (District Meter Areas) management - NRW (Non-revenue water) - AMR (Automatic Meter Reading) - MNF Log (Minimum night flow) - Monthly Water Consumption Log -Tamper-Proof Device - Water Leaking Detector - Bi-Directional Flow Indicator - ISO 4064:2005 / ISO 4064: 1993 - All Kinds of Transfer Interface (wired/ wireless) - Smart houses, smart building

    By Energy Management System Co., Ltd. based in Tainan City, TAIWAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you