Only show results available in Virginia? Ok

oil monitor Applications

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Stormwater Discharge Monitoring for Oil Spills

    Leakwise can detect oil spills in stormwater due to runoff and open channels before discharge into public water.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Groundwater monitoring for oil tank leaks

    Leakwise can detect oil leaks from tank bottoms much more quickly than other manual methods, thus reducing the risk of severe groundwater contamination.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for oil & gas

    Overview The business of exploration, transportation and refining of oil and gas involves heavy equipment and transportation at each step - equipment that is costly to maintain and to repair. A proper condition based maintenance program enabled predictive maintenance, saving time, money and preventing costly downtime.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Single Gas Monitoring - Pipeline Monitoring

    Application: measurements of single gas species over pipeline or similar extremely long emission source. Application: measuring CH4 emissions from a natural gas pipeline through a large densely populated and congested area.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Water monitoring for the oil&gas industry

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

  • Premium

    Monitoring solutions for the oil & gas / marine industry

    With vast experience in the Oil & Gas sector, we help you to perform, comply and thrive. Although energy flows around the world can be volatile and unpredictable, your operation cannot be. Whether upstream or downstream, you need a partner who understands that you must maintain and maximize plant availability - and do it with ever-tighter resources.

    By Endress Hauser AG based in Reinach, SWITZERLAND.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings,...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Quality control of oilseeds and pressed oil

    For the manufacturers of edible oils it is very important to control the crushing process at all the stages to achieve the best cost efficiency. In order to provide maximum yield and meet the product specifications it is necessary to monitor process as closely and rapidly as possible. Rapid determination of the key parameters with the use of InfraLUM® NIR analyzers provides the opportunity to control the process at every stage from quality control of oilseeds at intake point to the QC of the final product...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Monitoring oil in power plant cooling water

    The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay set-point.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Noise and vibration monitoring for oil and gas industry

    The oil and gas industry requires major infrastructure in terms of refineries and offshore extraction platforms which operate continuously. A large number of essential rotating machines, structures and piping networks are subjected to high levels of demand in a difficult environment, leading to the potential for breakage.

    By ACOEM based in Limonest, FRANCE.

  • Water discharge monitoring for retention tanks

    Leakwise detects oil buildup in retention tanks at the end of the treatment process and prevents the discharge of oily water into the environment.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Multiparameter Monitoring for the Offshore Oil & Gas Industry

    Meeting the demands of small ROV’s to work class vehicles in the offshore oil & gas industry, Valeport have a range of sensors and probes to measure the physical parameters vital to safe operation. From sensors to aid operation of the vehicle to probes for data input into metrology and construction operations, our “industry standard” packages are designed and built to perform. AUV requirements can mean provision of complete housed instruments or OEM style for users own interface. Our...

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Crude Oil Applications in Canada

    Sitelab's UVF-3100D analyzer is used in Canada for sites contaminated with heavy crude oil and bitumen.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Monitoring Oil and Grease in Wastewater

    Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR analyze

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB based in Furulund, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you