Only show results available in Virginia? Ok

oil plant processing Applications

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Process design & engineering services for gas processing industry

    Proxion Process’ capabilities and experience in gas processing include gas dehydration, gas sweetening, sulfur recovery, NGL recovering and fractionation, natural gas liquefaction, and gas compression and reinjection. We can provide debottlenecking studies to increase throughput and decrease production schedules. Our personnel have experience in natural gas processing plants industry-wide.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Moisture Monitoring for Refinery Recycle Gas & Plant Start-up

    Optimal performance of petrochemical reforming catalysts depends upon maintaining an optimal moisture / chloride ratio within the reforming reactor. When moisture and chloride are out of balance, catalysts suffer from higher deactivation rates and decreased yields. The cost of inadequately controlling the moisture / chloride ratio can be very high in terms of yield losses, off-spec product, increased catalyst regeneration , early catalyst replacement , processing upsets and / or increased downtime.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Oily Waste

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry® technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment. Find more information and the benefits of VacuDry® oily waste plants on http://www.econindustries.com/applications/oily-wastes

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    VOCs gas leak detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Trivol 102 Regeneration

    Trivol 102 Regeneration is a natural based absorbent that will soak up all hydrocarbon spills on land. We have super charged our product with millions of microbes that speed up the biodegradation process. Another special additive helps to naturally fertilize the soil to stimulate plant growth and further remediate the affected area. Trivol 102 Regeneration can be added to Trivol 101 Containment after it has been skimmed from water to dry ground.

    By Ameret LLC based in Overland Park, MISSOURI (USA).

  • Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Premium

    Centrifuges for Industrial Waste Water, Minerals and Oil

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil from the cleaning of crude oil tanks. Processing of drilling slurry, drilling emulsion and drilling muds. Processing of ore and minerals.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Oil water separation for the food industry

    Packaged-food producers frequently use and then must discard large batches of cooking oil used in their process. Usually they drain most of the oil directly from equipment, but they must remove residual oil by regularly washing fryers, ovens, conveyors, and other machinery. 

    The oil mixes with the wash water and becomes part of the plants wastewater stream. Having oil in wastewater complicates the wastewater-treatment process by making it more expensive, more time-consuming, and less effective. Additionally. as with other manufacturers, packaged-food producers want to reduce waste and decrease the environmental impact of operations. That is why removing used oil and solids from wastewater before it is discharged is a priority.

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • Premium

    Mixers, dryers, innovative solutions for power plant technology

    Conditioning of Ash and Dust

    No matter where ash and dust accumulate, AVA continuous or batch mixers can condition them to a transportable final product for disposal or recycling. The applications range from power plant ash derived from lignite, hard coal, biomass, or waste incineration power plants to filter dusts from steelworks and coking plants through to special applications such as hot or reactive ashes from various processes, such as shale oil production.

    By AVA - Huep GmbH u. Co. KG based in Herrsching, GERMANY.

  • Premium

    Metal Sludge

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry® unit. The absence of oxygen in the VacuDry® process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices. Find more information and the benefits of VacuDry® metal sludge plants on http://www.econindustries.com/applications/metal-sludge

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Hydrocyclones for automotive applications

    Krebs cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning solution.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Premium

    Absolute separation for the energy sector

    Energy will have more influence in the future than in the past, not only in the economic field, but also in social and individual behaviours. VITONE ECO supports its customers in this important sector supplying with plants, which assure great efficiency and whose use fits into an idea of sustainable development. VITONE ECO offers solutions for the treatment of mineral oils and fuels from refineries and lagoons, dehydration of plants producing biogas, production processes of non-fossil fuels, such as biodiesel and bioethanol.

    By Vitone Eco S.r.l. based in Bitonto, ITALY.

  • Odor control solutions for industrial sector

    Malodors can commonly be the by-prodcut of many industrial and manufacturing processes. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the petro-chemical industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public communities which surround these plants.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you