Only show results in Virginia? Ok

oil recovery Applications

  • Oil spill recovery

    As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Enhanced oil recovery treatment for oil and gas industry

    Enhanced Oil Recovery (EOR) is a broad O&G Industry term, but almost always involves some kind of water treatment processes. Whether you are trying to increase injectivity, kill bacteria, break emulsions or destroy polymers, MIOX has equipment to help. MIOX’s exclusive Mixed Oxidant technology turns your EOR site into an on-demand chemistry factory - eliminating middle men and lowering costs.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Enhanced Oil Recovery - Produced/ Impaired/ Wastewater

    WILSA® technology improves the efficiency of existing separation equipment in produced/ impaired water. The non-chemical ElectoWave Conditioning system supercharges Stokes Law to break emulsions, enhance coalescing, reduce viscosity and retention time. This allows traditional/ existing separators to function more efficiently and to either reduce or eliminated chemical programs used to achieve separation.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • OIL, GAS & MINING

    We supply activated carbon products for a wide range of oil, gas and mining applications. We deliver solutions for drilling and completion operations, gold recovery, subsea pipeline and industrial insulation, metal processing and more.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Wilsa ElectroWaveTM Conditioning - Non-chemical water conditioning, break emulsions, enhance recovery

    Hudson Industries (a licensed partner) is now offering the patented Wilsa ElectroWaveTM Conditioner (EWC) for non-chemical water conditioning that provides enhanced oil recovery up to 99.999% with the power to break difficult emulsions. The Wilsa Effect is targeted at polar fluids, such as water. The Wilsa EWC directly targets the surface and interfacial tension of water molecules which breaks emulsions and forces the water to reject foreign matter such as oil and suspended solids. Furthermore viscosity is...

    By Hudson Industries based in Vienna, OHIO (USA).

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • High performance separation system for lube oil industry

    Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been...

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Sorbents

    SorbEater is a synthetic super-absorbent with the highest oil recovery ratio of ANY known absorbent material resulting in less product required and less product to dispose of. This provides significant savings on the costly disposal fees associated with hazardous waste. It is highly effective on fresh water, soil, sand and sea. During development it outperformed the traditional organic peat products in every test. Ideal for: Any hydrocarbon spills or contamination. It has been used successfully with...

    By Skyhawk Global Ltd based in Barry, UNITED KINGDOM.

  • Agitation and mixing solutions for oil & gas

    The two main areas in the oil and gas market are upstream operations such as exploration, recovery, storage, and transfer and downstream refining operations.  Exploration for oil and gas includes offshore drilling rigs and land rigs.  Downstream production includes the cracking of oil into transportation and fuel products and a variety of petrochemicals.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Wastewater technology for the oil exploration and refinery

    In the secondary recovery stage of an oil reservoir, process water plays a central role, just as in the extraction of natural gas. After the oil exploration, the produced water must be separated from the oil and gas. The process water needs to be prepared in order to be re-injected into the water cycle of production. For this purpose, highly efficient separation methods are required.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the oil & gas sector

    Selection of oil gas data loggers for monitoring & recording data in the field. Robust, programmable, universal-input, multi-channel, remote models with up 48 inputs for any measurement requirement. Oil and gas industrial data loggers for applications including oil and natural gas recovery and processing, monitoring temperature and pressure of steam and other factors in oil wells, biogas generation and conversion, water pressure, pumping efficiency, and more.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Water treatment research for oil and gas industry

    The upstream oil and gas industry is increasingly becoming a water management industry. Globally, three barrels of water is extracted for every one barrel of oil produced. With effective management, this produced water can become a source of value, as disposal options become limited and environmental regulations tighten. New water treatment technologies will allow this water to be reused in waterflooding, enhanced oil recovery and hydraulic fracturing operations, in a market worth $5.2 billion in 2014....

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for Oil and gas industry

    Klorigen™ systems safely generate the chlorine gas and/or high strength (up to 15%) sodium hypochlorite that is typically used to control biological fouling experienced in cooling water processes in the oil and gas industry. In addition to cooling water applications,  Klorigen™ technology is well suited to other oil field applications which include hydrogen sulfide removal,  enhanced oil recovery and frac water treatment. Onsite generation allows oil and gas applications to continue using...

    By Electrolytic Technologies LLC based in North Miami Beach, FLORIDA (USA).

  • Beach & Shoreline

    For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter...

    By DESMI A/S based in Noerresundby, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you