Only show results available in Virginia? Ok

oil recycling Applications

  • Premium

    Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Oil skimmers for API separators industry

    Ambar’s belt mop oil skimmer is ideal for the API separators because the mop can cover the entire width of the API thus giving the oil no place to hide. The recovered oil can gravity drain from the oil skimmer or it can be pumped to a near by oil storage container. The end result is recycled oil, improved efficiency and lower operating costs.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

  • Waste tyre recycling fuel oil pyrolysis plant

    Waste tyre recycling the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution . As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 2. Final diesel come out from our distillation plant and deodorant & decolorant can be used in diesel generator. 3. Used in diesel powered cars, such as vans, truck, tractor, etc. 4. Use as heating oil, industrial and home. Carbon black : 1. Make it to briquette for fuel. 2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh. Contact: Ms Bonnie Phone: +86-371-5677 1821 +86 15893800169 Skype: bonniezhao2 Email: oilmachine@doinggroup.com www.wastetireoil.com

  • Plastic shredding for the plastic recycling industry

    Plastic materials mainly consist of crude oil and are therefore in demand for environmentally friendly recy-cling processes for the conservation of resources. In order to live up to the numerous applications and indi-vidual expectations of our customers, LINDNER reSource fully concentrates on processing of plastic materials in the Lindner group of companies.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Fuel oil application of continuous pyrolysis plant for tire recycling

    Fuel Oil (45% to 52%) The main application of oil products produced by Doing continuous pyrolysis plant for tires recycling is the fuel oil that is wide used for industrial and commercial purposes. 45% to 52% oil of the amount of recycled scrap tires can be carried with licensed tanker trucks.

  • Bins for cooking fats, oils, food wastes, liquid slops, slaughterhouse wastes and animal by-products

    The FATBOXX and FATBOXX max are perfectly new waste bins for disposing of cooking fats, oils, food wastes and liquid slops and slaughterhouse wastes and animal by-products. The special construction of the body and lid offer many benefits for end consumers and waste management companies.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Moisture Monitoring for Refinery Recycle Gas & Plant Start-up

    Optimal performance of petrochemical reforming catalysts depends upon maintaining an optimal moisture / chloride ratio within the reforming reactor. When moisture and chloride are out of balance, catalysts suffer from higher deactivation rates and decreased yields. The cost of inadequately controlling the moisture / chloride ratio can be very high in terms of yield losses, off-spec product, increased catalyst regeneration , early catalyst replacement , processing upsets and / or increased downtime.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Food Waste Recycling, Reduction or Disposal Systems for Mining Oil & Gas Exploration

    Oil and Gas Pipeline Labour Camps: With applications across Turkey, Azerbaijan and the former Russian State of Georgia, Tidy Planet are suppliers to 7 different locations for large scale equipment to generate energy from the food wastes at these 400-2000 person sites. With the sites needing a solution that prevents waste being backhauled many miles to registered facilities, having a robust unit on hand that generates the heating and hot water for the kitchens, shower block and laundry is ideal. The Dragon is a scalable solution and can be provided for sites with 200-10,000 staff on site. •Remote Mines & Mine Labour: Treating food wastes at source in remote applications where landfill or uncontrolled dumping of wastes is no longer permitted, on site Rocket composting to allow the use of a composted end product for land remediation is often chosen. Otherwise as with oil & gas the Dragon food waste / energy system a preferred alternative providing a simple method of energy generation

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • Premium

    Crushing of cans with Mercodor crushing systems

    The crushing of cans such as, for example, paint cans, food cans, oil cans or beverage cans serves, on the one hand, for recycling the raw materials and at the same time contributes to the protection of the environment, because part of the recycled raw materials can be reused, but also, on the other hand, for the volume reduction.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Water treatment solutions for the oil & gas industry

    Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Waste Tyre Recycling Machine

    Waste Tyre Recycling Machine,RESEM provides Pyrolysis Oil Plant systems that convert petroleum based waste streams such as plastics, tires, into quality fuels, carbons.

  • Premium

    Machine condition monitoring for marine

    Overview

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down time.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • Hazardous and Special Wastes

    Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an environmentally benign product called Plasmarok®.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Patented Waste Water Recovery System for Marine Refinishing Industry

    Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

    By GEOMAT based in Tampa, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you