Only show results available in Virginia? Ok

oil remediation Applications

  • Remedial Construction for the Energy Sector

    ENTACT holds alliance contracts or master service agreements with most of the major energy companies in the United States. These service agreements were awarded and are maintained based upon health and safety culture and metrics, competitive pricing, and depth of experience. Our experience includes environmental and geotechnical construction projects at active refineries, exploration and production sites, terminals, pipelines, and abandoned properties.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Odor Control for Remediation

    Helping Others Clean Up The Earth By Clearing Up Brownfield Remediation Odors

    Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Soil Applications Testing Crude Oil

    Sitelab's UVF-3100D model is used by environmental contractor to assist with soil remediation projects in West Texas.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Manufactured Gas Plant Site Remediation

    It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and surface waters. The urgency of remediation has increased due to a potent blend of community activism, regulatory pressure, high real estate values, and the need to reduce liability in light of the Sarbanes-Oxley Act and other measures.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Horizontal Remediation Well Systems

    Horizontal wells are a proven and effective remedial technology for site cleanup. For environmental applications, horizontal wells offer several advantages in comparison to traditional vertical wells. The first horizontal wells were installed using a mid-sized directional drill rig in 1993 by Directional Technologies, Inc. The three (3) horizontal Soil Vapor Extraction wells installed at John F. Kennedy International Airport was the beginning of a new industry. Directional Technologies, Inc. founders transferred their experience from the oil fields to the environmental industry. This has resulted in the installation of over 1,000 horizontal wells for site remediation worldwide. Horizontal Remediation Wells are a time-tested and proven technology that can provide solutions for problems previously considered unfeasible. Interested in learning more about this remedial technology, visit us at for case studies and more.

    By Directional Technologies, Inc. based in Miramar Beach, FLORIDA (USA).

  • Automated solutions for the environmental remediation dredging

    LWT’s dredging systems are used for environmental remediation and cleanup. The automated dredging systems from LWT can handle the toughest contaminated sludge and keep operators safe with radio remote operation. Bio-degradable hydraulic oil used in the dredges eliminates any environmental hazards.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Oil skimmers for montoring wells industry

    Ambar manufactures a specific oil skimmer for sub surface remediation where oil needs to be removed from ground water monitoring wells.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Trivol 102 Regeneration

    Trivol 102 Regeneration is a natural based absorbent that will soak up all hydrocarbon spills on land. We have super charged our product with millions of microbes that speed up the biodegradation process. Another special additive helps to naturally fertilize the soil to stimulate plant growth and further remediate the affected area. Trivol 102 Regeneration can be added to Trivol 101 Containment after it has been skimmed from water to dry ground.

    By Ameret LLC based in Overland Park, MISSOURI (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Premium

    Activated Carbon Filtration for the Water Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.

    By General Carbon Corp. based in Paterson, NEW JERSEY (USA).

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Sulfide Oxidation with Hydrogen Peroxide (H2O2)

    Sulfide Odor Control Sulfide is found throughout the environment as a result of both natural and industrial processes. Most sulfide found in nature was produced biologically (under anaerobic conditions) and occurs as free hydrogen sulfide (H2S) - characterized by its rotten egg odor. We are most likely to encounter biogenic H2S in sour groundwaters, swamps and marshes, natural gas deposits, and sewage collection/treatment systems. Manmade sources of H2S typically occur as a result of natural materials containing sulfur (e.g., coal, gas and oil) being refined into industrial products. For a variety of reasons - aesthetics (odor control), health (toxicity), ecological (oxygen depletion in receiving waters), and economic (corrosion of equipment and infrastructure) - sulfide laden wastewaters must be handled carefully and remediated before they can be released to the environment. Typical discharge limits for sulfide are < 1 mg/L. Sulfide Treatment Alternatives There are dozens of alternatives for treating sulfide laden waters, ranging from simple air stripping (for the low levels present in groundwaters) to elaborate sulfur recovery plants (used to treat several tons per day at refineries and coal burning power plants). There are processes based on biology (using compost filters, scrubbing media, or inhibition/disinfection), chemistry (oxidation, precipitation, absorption, and combination), and physics (adsorption, volatilization, and incineration). Each process occupies a niche which is often defined by the scale and continuity of treatment, whether the sulfide is in solution or is a gas, the concentration of sulfide involved, and the disposition of the sulfide containing medium. However, for reasons relating to convenience and flexibility, chemical oxidation (using hydrogen peroxide) continues to grow in its scope of application. Treatment with Hydrogen Peroxide While other peroxygens such as permonosulfuric (Caro’s) acid, peracetic acid, and persulfates will oxidize sulfide, their use for this application is overkill. Hydrogen peroxide (H2O2) is considerably simpler and more cost-effective. H2O2 may control sulfides in two ways, depending on the application: Prevention - by providing dissolved oxygen which inhibits the septic conditions which lead to biological sulfide formation; and Destruction - by oxidizing sulfide to elemental sulfur or sulfate ion.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you