Only show results in Virginia? Ok

oil sampling Applications

  • Premium

    Oil sampling for the environmental industry

    By General Oceanics Inc. based in Miami, FLORIDA (USA).

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Premium

    Oil on Metals Analysis

    Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    NAPL Fingerprinting Analysis

    Sitelab's mobile laboratory was used by a client at a former oil refinery in Kansas and at a large tank farm in Massachusetts. The UVF data was used to delineate and map subsurface plumes of NAPL. Oil samples were collected from monitoring wells and analyzed for their GRO/DRO or VPH/EPH content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. Then a third column is used in conjunction with a second 10-port valve for individual analysis of methane. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measurement of acetaldehyde, methanol, & benzene in CO2 applications for gas manufacturers & food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Methanol, and Benzene (AMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages. The BevAlert Model 8900 employs a photoionization detector (PID). The AMB in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the AMB and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Acetaldehyde, Methanol, and Benzene are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Octane Number of Gasoline using NIR Spectroscopy #3012

    When every second counts and performance is on the line Guided Wave's NIR analyzers allow for easy measurement of octane numbers in gasoline and refinery production units using fiber optic -based, near-infrared (NIR) spectroscopy. *Fast and reliable measurement of the octane number of gasoline (RON & MON). * Control gasoline production in real-time directly with in process monitoring. * Certify gasoline meets specification before release. *Gain significant improvements in process control. *Minimize the need for laboratory sample collection and the labor intensive "knock engine" method. The measurement of the octane number of gasoline using NIR spectroscopy is both fast and reliable utilizing Guided Wave analyzers. Results are available in real-time (seconds) for multiple parameters in complex streams. Request Application Note #3012

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Specialty Cleaners and Lubricants for Solar Industry

    IPC manufactures specialty detergents for solar panel cleaning applications.  Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is effective.  Contact us today for a sample of our solar panel cleaners.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • APHA Color #3020

    Measurement of APHA color either on-line or in a laboratory setting using a photometer. Background: APHA is sometimes referred to as the Platinum Cobalt (Pt/Co) or Hazen scale. Also referred to as a “yellowness index”, the APHA color scale is a common method of comparison of the intensity of yellow-tinted samples to assess the quality of liquids that are clear to yellowish in color. Originally developed to determine the purity of municipal water supplies, it is now used as a metric for purity in the water, chemical, oil, plastics, and pharmaceutical industries. APHA color quantifies the appearance of trace amounts of yellowness, which is a visual indicator of product degradation due to exposure to light or heat; the presence of impurities and negative effects of processing. As such APHA color is often used as a product release specification. APHA is a single number yellowness index. The units are based on a dilution of a 500ppm solution of PtCo.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you