Only show results in Virginia? Ok

oil spill system Applications

  • Premium

    Oil spill recovery

    As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic environment. In addition, we offer a range of ‘fail safe’ fire booms for use in controlled burning of oil in ice.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Industrial

    We have a specialist range of skimmers and systems to suit the requirements of the industries, including in-tank skimming. The removal of oil and chemicals from water within the industrial environment is a key requirement – not only due to increased legislation but also because it is considered a dependable and cost effective way to achieve the desired level of water purity. It can also increase the efficiency of existing installations, such as large scale API oil-water or parallel plate separators, without the need for expensive capex expansions or new builds. The DESMI skimmers are typically manufactured from high nickel alloys to resist ‘sour’ applications and can be hydraulic, air or low voltage drive. In applications that require ATEX or equal qualification, we can satisfy this requirement.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Oil spill detection for offshore

    Leakwise systems can be installed off rivers, oil terminals, oil ports and other locations for the early detection of oil spills. Leakwise can significantly reduce the risk of major environmental contamination.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    Port, Harbours & Terminals

    Ports, harbours and terminals demand special consideration as the equipment requirements can vary significantly. This could range from the simple, inexpensive environmentally friendly ‘A’ Boom to OilFence, a rugged asymmetric boom. OilFence can boast in excess of 15 years of service in permanent deployment applications and due to its massive reserve buoyancy, it can support ‘fish-net’ suspended from the boom itself. Many of the recovery systems in the nearshore and shoreline segment can be employed in ports, harbours and terminals. However, we also offer the versatile ‘Mop’ systems which can be installed to influence a large surface area. Indeed, ‘Mop’ skimmers have also proven themselves in the open waters, oil pits and industrial applications.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Coastal & Nearshore

    Coastal & Nearshore For coastal and nearshore use DESMI provides the well known Ro-Boom product but in smaller sizes whilst maintaining the integrity of the larger product offerings. Alternatively, you may want to consider SPI or a lighter weight boom if there are deployment and recovery considerations or restrictions. Under these circumstances, the Troilboom AF (Air Filled) offers a light weight rapid response solution. It is manufactured as standard in bright orange polyurethane fabric offering durability and strength. Top tension wires are also available to enhance performance. A wide range of combination skimmers have been developed for the coastal environment. These include weir, brush, disc and belt recovery systems with on-board pumps. This results in systems being able to recover a wide range of oils including emulsions and weathered compounds. An example of this is the Terminator skimmer system.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Beach & Shoreline

    For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter even with its own transfer pump system to divert the pollutant. Although the Ro-Tank can also be used on land or the back of a trailer, the Troil range of open top tanks offer the perfect solution for storage of the recovered oil. These tanks are very lightweight and need no special tools to erect. The tanks offer a wide selection of capacities – indeed , the smaller units are ideal for decontamination duties.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Sea Water Intakes & Outfalls

    Desalinated sea water is a major water source for many countries. These facilities are often built with power generation plant and a major factor for all installations is reliability. This reliability starts with the sea water intake and regardless of the desalination technology (MSF, MED, RO) unplanned plant shut downs due to the ingress of hydrocarbons or a sudden jelly fish attack are absolutely unacceptable. The DESMI Oil Spill Response segment have many years experience in the design, manufacture, installation and commissioning of permanent oil boom and jelly fish net systems for a vast range of sea water intake systems. We have an impressive history of proven oil spill technology at various locations around the world including the harsh Middle East environment.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Fast Water, Rivers & Lakes

    Oil spill response operations are notably difficult in rivers with strong current. In addition, when considering response times for river spills in relation to the mobilisation time required for conventional land- or vessel-based boom systems, a timely response is often a logistic impossibility especially in the more remote regions. Therefore, equipment must be readily at hand near the sites of operation and pre-rigged lines, cables and mooring areas are a must. Selection of a good location to deploy the oil containment system is dependent upon prior planning and understanding of the currents. Drift studies, river run off histories, tidal current tables and charts, plus computer modeling are all useful tools to understand the flow patterns and to develop recovery strategies. Reading the currents and flow patterns require practice and understanding of the hydrodynamics involved.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Deep Water Offshore & Offshore

    - including PSV & Salvage packages In the rugged and harsh environment of the offshore, DESMI is the market leader for boom, recovery systems, burn kits and storage systems for oil spill response. The world renowned Ro-Boom, which is available up to 3.5 metres in height, is unsurpassed in its manufacture, operation and longevity. It can be supplied in containerised, standard systems with DNV certification. Ideal for deep water offshore operations. Ro-Boom continues to set the standards for containment and deflection in the challenging offshore applications. In addition, we have developed the Hi-Seas Speed-Sweep – a sweep system that can be operated effectively up to 3 knots. This is a heavy duty system that is manufactured from Ro-Boom material and can be simply connected to existing boom systems to increase the area of influence.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Environment health and safety software for the oil & gas industry

    Intelex provides software systems to Oil and Gas companies around the world to help them ensure the safety of their employees, reduce their environmental impacts and manage the quality of their products. Intelex clients use our software to track and report on incidents, spill and release data, nonconformances, audits, safety meetings, permits and a host of other essential information.

    By Intelex Technologies Inc. based in Toronto, ONTARIO (CANADA).

  • Pumping solutions for offshore liquid ring pump systems

    In offshore drilling, the safety of both people and the environment is dependent on the constant management of risk. With great public concern and media attention, the safety of offshore drilling for both people and environment, has been widely discussed for many years. Offshore drilling can potentially cause oil spills or disposal of other waste into the ocean, impacting human life and marine life.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Premium

    Seawatch Applications

    Fugro OCEANOR SEAWATCH systems have been installed in numerous countries around the world. They have an impressive operational record from the roughest seas worldwide, the Arctic and the Tropics, to the coastal zones.

    • Monitor meteorological, oceanographic, water quality conditions
    • Detect tsunamis
    • Monitor algae blooms
    • Improve coastal zone management
    • Assist with oil spill contingency planning and forecasting

    By Fugro OCEANOR AS based in Trondheim, NORWAY.

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you