Only show results in Virginia? Ok

oil storage tank Applications

  • FoamFatale Storage Tank Fire Suppression System

    Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof tank.

    By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Water Storage for the Crude Oil Industry

    Superior Tank Co., Inc. manufactures Bolted Steel Tanks and Welded Steel Tanks specifically designed for the oil industry. Bolted steel tanks are tailored to the strict requirements of oil storage and API 12B Standard with capacities from 100 to 10,000 BBL. Coatings and accessories are specifically designed for the oil and petrochemical industry. Flat panel Bolted Steel Tanks are also available for oil storage.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Premium

    Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Solutions for the large tank cleaning and degassing

    Rapid turnaround is essential when an oil or fuel storage tank is stripped for repair or scheduled maintenance.  This time-sensitive process can be frustrated by the presence of high vapor levels and unpumpable sludge.  Over the past 30 years, BioSolve Pinkwater has proven to be a worker friendly solution to these challenges.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Geosynthetic Lining for Secondary Containment

    GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Microbial testing in upstream oil & gas industry

    On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators and storage tanks and bullets. The best solution to these problems is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Solutions for the small tank cleaning and degassing

    BioSolve Pinkwater is a proven tool used in the process of removing and repairing fuel storage tanks of all sizes.  Pinkwater is best known for its unmatched performance suppressing volatile organic vapors that are present when working with fuel tanks (both AST and UST). The product can also be used to assist in loosening and removing tank bottom sludge.  Major US and foreign oil companies as well as small tank removal teams find working with Pinkwater to be safe, simple, effective and worker friendly as compared to alternative approaches to tank cleaning and degassing.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Premium

    Beach & Shoreline

    For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter even with its own transfer pump system to divert the pollutant. Although the Ro-Tank can also be used on land or the back of a trailer, the Troil range of open top tanks offer the perfect solution for storage of the recovered oil. These tanks are very lightweight and need no special tools to erect. The tanks offer a wide selection of capacities – indeed , the smaller units are ideal for decontamination duties.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Pulsair`s industrial mixers for oil & lubiricants industry

    Pulsair Systems can custom design a system that mixes and blends tanks of virtually any tank size or configuration. No application is too large or too small. Our fast, efficient and economical Pulsair mixers can give you substantial savings on both electricity and compressed air. Our control systems can operate either single or multiple tanks. Whether it`s blending lubricants, mixing base stock and additives, thinning heavy emulsions or keeping storage tanks at a constant temperature, Pulsair Systems` technology has proven to be dramatically better. Our systems blends lubricants to specification usually within 30 minutes of adding all the ingredients used in your recipe. The result is a greater profit margin for you, the operator.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Oil skimmers for petro chemical industry

    The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Nitrogen Generation for Gas Blanketing

    When you need gas blanketing or tank padding for your storage tanks and containers, our team at Gas Control Systems can help. Our gas blanketing nitrogen generator offering can meet all of your needs. When it comes to gas blanketing, nitrogen is usually the best option. It can be used in a variety of situations including in tanks that are storing chemicals or hydrocarbons. The nitrogen will help reduce your oxygen content in your storage tanks or containers to a safe level.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you