Only show results in Virginia? Ok

oil water separation system Applications

  • Oil Mist Separators for Shipbuilding

    A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination....

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers,...

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for glycol dehydration

    Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in industry.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for caustic treating industry

    The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the...

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Centrifuges for industrial waste water, minerals and oil industry

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Industrial

    We have a specialist range of skimmers and systems to suit the requirements of the industries, including in-tank skimming. The removal of oil and chemicals from water within the industrial environment is a key requirement – not only due to increased legislation but also because it is considered a dependable and cost effective way to achieve the desired level of water purity. It can also increase the efficiency of existing installations, such as large scale API oil-water or parallel plate separators, without the...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Enhanced Oil Recovery - Produced/ Impaired/ Wastewater

    WILSA® technology improves the efficiency of existing separation equipment in produced/ impaired water. The non-chemical ElectoWave Conditioning system supercharges Stokes Law to break emulsions, enhance coalescing, reduce viscosity and retention time. This allows traditional/ existing separators to function more efficiently and to either reduce or eliminated chemical programs used to achieve separation.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Oil skimmers for petro chemical industry

    The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex...

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled...

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Wastewater treatment solutions for healthcare sector

    A constantly growing sector characterized by small flowrates of wastewater containing a great variety of compounds which vary from one production to another. Including a modular package flotation system, such as IDRAFLOT, for the separation of oil, fat and suspended solids, allows to have a flexible and compact solution for the whole water cycle management, controlling the costs and respecting the environment.

    By IDRAFLOT based in Zoppola, ITALY.

  • Laboratory equipments for fluid typing

    GeoSpec2 instruments fitted with Pulsed Field Gradients (pfg) are able to carry out measurements dependent on the diffusion, flow, or distribution of the fluids within the core sample. One application is for fluid typing. It is possible that different fluids, such as heavy oils and partially bound water, may exhibit similar T2 values, which makes it difficult to identify which fluid is which using a standard T2 distribution. However, even if they have similar T2 values they are...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you