Only show results in Virginia? Ok

oil-water separator Applications

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Premium

    Oil Mist Separators for Shipbuilding

    A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. Throughput: 1,200 Nm³/h @ 50 Hz.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • Oil water separation for the food industry

    Packaged-food producers frequently use and then must discard large batches of cooking oil used in their process. Usually they drain most of the oil directly from equipment, but they must remove residual oil by regularly washing fryers, ovens, conveyors, and other machinery. 

    The oil mixes with the wash water and becomes part of the plants wastewater stream. Having oil in wastewater complicates the wastewater-treatment process by making it more expensive, more time-consuming, and less effective. Additionally. as with other manufacturers, packaged-food producers want to reduce waste and decrease the environmental impact of operations. That is why removing used oil and solids from wastewater before it is discharged is a priority.

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Oil skimmers for API separators industry

    Ambar’s belt mop oil skimmer is ideal for the API separators because the mop can cover the entire width of the API thus giving the oil no place to hide. The recovered oil can gravity drain from the oil skimmer or it can be pumped to a near by oil storage container. The end result is recycled oil, improved efficiency and lower operating costs.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Industrial Meshes for Distillation

    In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Industrial Meshes for Fluidization

    Pneumatic conveyors lines for conveying media in powder form are equipped with fluidization media made of GEKUPLATE wire mesh laminates. SolidWEAVE stainless steel media satisfy all the requirements which are critical for fluidization.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Industrial water Uranium recovery & purification

    The type of Uranium mineralization and the nature of its association within a particular deposit will have a major impact on process route selection. Uranium minerals are classified according to their influence on extractive metallurgy. The presence of impurities such as Vanadium, Molybdenum, and others may dictate that ion exchange is to be employed.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for caustic treating industry

    The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the hydrocarbon phase.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for silicones industry

    Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial water Gold and Silver

    Cyanidation is still the most widely used method to leach gold, using sodium or calcium cyanide as lixiviant. An anionic gold-cyanide complex is formed that is extractable by basic resins. Other metals present in the ore, such as silver and base metals ( copper, nickel, cobalt, zinc, iron, etc. ) are also leached in cyanide media. Selective ion exchange resins are designed to preferentially adsorb the mono-valent gold-cyanide species.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Nickel Laterite

    Lateritic nickel ore deposits are surficial, weathered rinds formed on ultramafic rocks. Nickel laterites are a very important type of nickel ore deposit, they comprise 73% of the continental world nickel resources. They are growing to become the most important source of nickel metal for world demand. Nickel is a hard, silver white metal that has industrial applications related to its strength, corrosion resistance, high ductility, good thermal and electrical conductivity and catalytic properties. Its primary use is in manufacture of stainless steel, steel alloys and superalloys. The Nickel purification process is very complex of which a few are based on ion exchange, each taking care of a part of the full process cycle.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Copper removal and recovery

    Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Filtration in waste water treatments. disinfection

    The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.
    The addition of an AZUD System allows:

    • Increased efficiency of the treatment equipment.
    • Decreases the quantity of chemicals used.
    • Avoids the “shadowing effect” created by larger particles in UV disinfection systems.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • High performance separation system for glycol dehydration

    Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in industry.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for coating industry

    Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online life.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you