Only show results available in Virginia? Ok

organic carbon monitoring Applications

  • Haze Monitoring

    The principle cause of regional and urban haze, or visibility impairment, is light extinction caused by fine particles, sulfates, organic and elemental carbon, nitrates and crustal matter. Particles between 0.1 and one micrometers in size are most effective at scattering light, in addition to being of greatest concern for human health.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Monitoring Raw Water Intake

    The Situation: Hydrocarbons in water intake used for municipal drinking water and desalination systems are commonly limited to 1 part per million. Problem: Naturally occurring organics in raw water are typically treated with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when some type of organic material is present but cannot differentiate between natural organics, such as algae or leaves and hydrocarbons. Solution: A fluorescence monitor can be configured for sensitivity to hydrocarbons, with no significant response to other organics. The TD-4100XDC has the highest sensitivity to hydrocarbons in raw water, has a low cost of ownership, and can be modified with Teflon, Monel, and other corrosion resistant materials for sea water environments. Please visit http://www.oilinwatermonitors.com/applications-2/raw-water-intake for more information about this application.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. Carbon dioxide production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Water monitoring for laboratories

    Chemical purity of water is assessed for a wide variety of different chemicals depending on the type of water and applicable local legislation. 

    Chemical analysis of water can include testing for nitrogen compounds, dissolved heavy metals, and total and dissolved organic carbon.

    Common water monitoring applications include:

    • Determination of suspended solids in waterusing for example glass fiber filters.
    • Chemical analyses of for example heavy metals, dissolved organic carbons (DOC), and ions.
    • Microbiological analyses using membrane based microfiltration methods

    By GE Healthcare UK Limited based in Little Chalfont, UNITED KINGDOM.

  • Premium

    Oxygen monitoring from aerobic and anaerobic for biodegradation tests

    Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.

    By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).

  • Forest Carbon Monioring

    Our Ecosystem (OE) can help you with: - Quantification of initial carbon stocks - Baseline and leakage assessment - Monitoring and verification OE makes it easy to access, organize, share and obtain information from maps and other spatial data on land and ecosystems, giving you the opportunity to interact with the data in an intuitive user interface. OE is delivered as a service that does not require specialist knowledge on geographical information system (GIS) software or remote sensing data and techniques within your organization. Instead of having to look at paper maps in a report, you will be able to pan through the data and zoom in to areas of interest. In addition, it allows you to extract information from the data for areas of special interest using powerful analytical tools. Your OE application is set up so that your data is secure, and you can control who has access to it.

    By Ecometrica based in London, UNITED KINGDOM.

  • Premium

    Methane and Carbon Dioxide Sensing for Biogas Applications

    Application: Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane, and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Drinking water solutions for the TOC removal efficiency

    Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine disinfection.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Measurement solution for total VOC via FTIR

    Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are taken as the standard reference method for Total VOC emission measurements.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas analysis & monitoring system for biogas analysis

    “Biogas” means a mixture of various types of gas (mostly methane) produced by bacterial fermentation in anaerobic conditions(absence of oxygen) of organic residues from waste, decaying plant, carcasses in putrescence. The analyzers of biogas by Infrared cells carry out the continuous analysis of CH4, O2, CO2, H2S and NH3. The whole process sees the decomposition of organic material by some types of bacteria, producing carbon dioxide, molecular hydrogen and methane(methane conversion of organic compounds).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Indoor Air Quality Monitoring

    Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. CO2 production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks. Excess CO2 levels can lead to tiredness and a lack of concentration and can contribute to the symptoms of Sick Building Syndrome such as headaches, eye, nose and throat irritation, itchy skin and nausea.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Total sulfur measurement for sulfur compounds in CO2 for food & beverage industry

    The BevAlert Model 8900 provides a total sulfur measurement for sulfur compounds in Carbon Dioxide. The measurement includes organic sulfides, Sulfur Dioxide, Carbonyl Sulfide, and Hydrogen Sulfide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor sulfur compounds in CO2 used in carbonated beverages.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of acetaldehyde, benzene, toluene, ethylbenzene, & xylenes in CO2 applications for food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Benzene, Toluene, Ethylbenzene, and Xylenes (ABTEX) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace volatile organic compounds in CO2 used in carbonated beverages.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you