Only show results available in Virginia? Ok

organic waste treatment Applications

  • Waste Treatment for Waste Preparation

    Material sorting and preparation is essential for effective product valorisation. Aware of this aspect, Ménart has participated in pioneering projects, equally in the preparatory stage of diverse organic waste destined for biogaz valorisation, through composting or co-generation, and in the sorting of household and industrial waste to be recycled, for example, for combustible waste.

    By Menart based in Dour, BELGIUM.

  • Waste Treatment for Green Waste

    Green waste is organic waste collected after cleaning open green spaces, recreational zones, private gardens, greenhouses, sports fields, roads. Open-air burning, public rubbish/trash collection or incineration have numerous negative impacts and are often banned. Composting is therefore the most adapted treatment solution for green waste. Due to its specialisation in high-level equipment adapted to intensive use, Ménart equips composting platforms. Ménart’s machines are robust and easily serviced and offer total user satisfaction.

    By Menart based in Dour, BELGIUM.

  • Premium

    Waste Sorting - Organic Waste Sorting

    The total waste volume contains a high percentage of organic material. This fraction is treated in different ways depending on country. Within the organic fraction, the inert material can cause significant problems during the different treatment processes. For this reason, the inert material content has to be reduced to a minimum in such a way that loses as little organic material as possible. The total waste volume contains a high percentage of organic material. This fraction is treated in different ways depending on country. Within the organic fraction, the inert material can cause significant problems during the different treatment processes. For this reason, the inert material content has to be reduced to a minimum in such a way that loses as little organic material as possible.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Biological waste water treatment plants solutions for the dairy industry

    Dairies’ production activities result to significant quantities of wastewater and waste by-products with high organic content that requires reduction before discharge.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Biological waste water treatment plants solutions for bio ethanol distilleries

    The waste (water) streams from the production of (bio) ethanol or ethanol spirits are generally very suitable for anaerobic treatment, due to their organic compounds.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Wastewater treatment for the textile sector

    The kind of waste water from tanneries has a high salt content that can be diluted, but is hard to eliminate. They can also have a high organic load due to the high dirtiness, including blood, sand and manure. The water itself from these industries can vary a lot from a company to another depending on its actividad. However, a common characteristic is the high content of materials in suspension due to fibres and precipitated proteins.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Wastewater treatment solutions for fat, oil & grease

    Proper waste treatment and free-flowing plumbing lines are critically tied to one another. Of the many products marketed which claim to aid plumbing problems, MICROCAT® products are unique. They offer a combination of micro organisms, enzymes (biochemical catalysts) and other ingredients which act together naturally to soften, loosen, remove and break down greases, fats and oils in plumbing lines, sewer systems, pump stations and treatment plants, thus keeping them clean and odour free. Developed through the years, MICROCAT® products, whether dry or liquid are capable of safely and effectively loosening and digesting the troublesome substances, which clog drainage systems and cause odours. When used on a regular basis, MICROCAT® products can result in savings on operational and maintenance costs.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Wastewater treatment for the winery

    The waste water from the transformation process in wineries has a high organic material content, as well as large pH variations that can be harmful to the environment. This water treatment must be carried out by using the appropriate processes.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Premium

    Wastewater Treatment for the Bioenergy Industry

    The waste (water) streams from the production of (bio) ethanol or ethanol spirits are generally very suitable for anaerobic treatment, due to their organic compounds. 

    The effluent streams produced by the different production processes are influences by a great number of parameters such as, process design, milling process, type of raw material, etc. This requires special attention in the design of the treatment plant for this type of industry. 

    Typical streams from these industries that can be treated are, whole stillage, thin stillage, spent wash, vinasse and condensate from evaporator. The Upflow Anaerobic Sludge Blanket (UASB) process and the External Circulation Sludge Bed (ECSB) process from HydroThane are worldwide proven processes for the treatment of this type of waste water.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Wastewater treatment for the meat and derived industry

    The water from this type of industry generates large amount of solids. The main sources of this waste are the phases of evisceration and blood draining, which contribute a large organic load. The application of our products is ideal for the treatment of this type of water.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Wastewater treatment for the tank cleaning

    The waste water from the transformation process in wineries has a high organic material content, as well as large pH variations that can be harmful to the environment. This water treatment must be carried out by using the appropriate processes.

    By Aguambiente based in La Cistérniga, SPAIN.

  • COD Reduction

    Chemical Oxygen Demand (COD) is used as a measure of organic pollutants in water. In wastewater treatment, it indicates the efficacy of a treatment process and is expressed in milligrams per litre (mg/L) or parts per million (ppm). Removing certain fractions of COD in waste streams can be particularly challenging, especially to levels safe for discharge to the environment.

    By Arvia Technology based in Runcorn, UNITED KINGDOM.

  • Premium

    Wastewater treatment for the sea- and inland ports/terminals

    Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid ship waste contains oil emulsion and saline bilge water among others.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI has been designing and manufacturing size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuel. SSI has supplied hundreds of systems worldwide for generating energy from many different waste materials—from industrial, municipal, and hazardous wastes to tires, mill waste, wood and other organic materials.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Wastewater treatment solutions for anaerobic sludge digestion sector

    Anaerobic digestion is a series of processes in which microorganisms break down biodegradable material in the absence of oxygen, used for industrial or domestic purposes to manage waste and/or to release energy. It is widely used as part of the process to treat wastewater, like Upflow Anaerobic Sludge Blanket (UASB) reactors. As part of an integrated waste management system, anaerobic digestion reduces the emission of landfill gas into the atmosphere. Anaerobic digestion is widely used as a renewable energy source because the process produces a methane and carbon dioxide rich biogas suitable for energy production, helping to replace fossil fuels. The nutrient-rich digestate which is also produced can be used as fertilizer. The digestion process begins with bacterial hydrolysis of the input materials in order to break down insoluble organic polymers such as carbohydrates and make them available for other bacteria. Acidogenic bacteria then convert the sugars and amino acids into carbon dioxide, hydrogen, ammonia, and organic acids. Acetogenic bacteria then convert these resulting organic acids into acetic acid, along with additional ammonia, hydrogen, and carbon dioxide. Finally, methanogens convert these products to methane and carbon dioxide.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Premium

    Water quality monitoring for textile industry

    Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Industrial shredders for WEEE/cables industry

    Since 2003 in Europe, the professionals of the sector of the electric and electronic components must organize dies of recovery, recycling or valorization of their called worn products WEEE (Waste Electrical and Electronic Equipment). Before the evolution of the legislation, Préciméca proposes since 1998 a machine (range 01-02) for the treatment of electronic cards. Large electric household appliances (ranges 50-02, 14-02, 17-02) with the Small household products (14-02, 12-02) to the data-processing components, you will find at Préciméca the machine adapted to your needs.

    By PRECIMECA Environnement based in Toulouse, FRANCE.

  • Energy and Fuels from Auto Shredder Residue (ASR)

    End of life vehicle processing recovers valuable recyclates and removes for recovery all pollutants from automobiles. After this process, the remaining vehicle is shredded for further treatment into smaller parts called Auto Shredder Residue (ASR) sometimes referred to as Auto Shredder Fluff or Car Fluff. ASR contains a mixture of all the different materials that make up the automobile, including metals, plastics, rubbers and textiles. This mixture of materials makes ASR a difficult waste to handle and potentially harmful to the environment. The Gasplasma® energy from waste process breaks down the ASR: Organic materials are transformed into a hydrogen-rich synthesis gas which is used to generate power / Inorganic materials are vitrified to become Plasmarok® /Any remaining ferrous and non-ferrous metals are recovered

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you