Only show results available in Virginia? Ok

oxygen generating Applications

  • Oxygen on-site generation systems for hospitals

    Demand for oxygen generators in the medical field is growing rapidly. Stricter international medical regulations is also putting a tougher demand on oxygen plants for flow, pressure and purity monitoring.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Oxygen generation for ozone industry

    Ozone is a highly effective method for bacteriological treatment and useful in a variety of everyday situations from removing odor to ensuring clean, high quality drinking water from the tap. But O3 is more than just effective. It is also environmentally safe, which makes it highly suitable for treating water in enormous quantities; both drinking water and industrial waste water, i.e. in industrial slaughterhouses.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Oxygen Generating Systems for Use with Ozone Generators

    Twice the output of air-fed systems . . . As customers demand more ozone for less capital investment, oxygen is quickly replacing air as the industry’s preferred feed gas. Ozone output normally doubles when 93% oxygen is fed into the corona discharge.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Oxygen Generating Systems for Emergency Response

    With Oxygen Generating Systems Intl. (OGSI)’s oxygen generating systems, care providers are assured that in the event of a disaster their oxygen supply chain will not be in jeopardy. By filling cylinders at your site, the uncertainty and logistics of delivered oxygen supplies are eliminated. OGSI has products to assist you in times of: Natural Disaster / Accidental Emergencies Terrorism / Epidemic Outbreak / Chemical / Biological Disaster

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • O2 Applications > Aquaculture - Oxygen supply for fish hatcheries

    Oxygen supply for fish hatchery and in particular:

    • Broodstock units;
    • Larval rearing units;
    • Weaning units;
    • Treatment for seawater wells;
    • Biological filter of re-circulation systems;
    • Ozone generation for water sterilization;

    Special Know-How & Services from NOXERIOR

    We at NOXERIOR are perfectly aware that oxygen is a variable cost for your hatchery operation. A reliable estimation of oxygen requirements and a correct dimensioning of an oxygen generation system from our OXYSWING® PSA oxygen generator product range will be determining for the economical benefits you expect from an on-site oxygen generation and supply system in your hatchery.

    We will provide consultancy regarding the most efficient oxygen distribution as well as technology for oxygen transfer and regulation into water under consideration of all relevant parameters. By using our in-house developed software we can calculate both the required amount of oxygen to be produced and the resulting energy consumption. Together with you will find a compromise between the use of energy and the efficiency of oxygen transfer to optimise costs.

    By NOXERIOR s.r.l. based in Grosseto, ITALY.

  • Stack Testing for Power Generation Plants

    POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Nitrogen generation for the Marine, Oil & Gas industry

    Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can produce 5% or lower oxygen levels.With the highest quality in components, PSA systems are extremely reliable with at least 48.000 running hours before CMS replacement is needed.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Biological waste water treatment plants solutions for brewing industry

    The brewing process generally generates unique, high-strength waste water as a by-product. The waste water typically has a high concentration of Biological Oxygen Demand (BOD) form the carbohydrates and protein used in brewing beer. Brewery waste water usually has a temperature of > 25 °C.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Gas monitoring instruments and systems for nitric acid process

    Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective Catalytic Reduction unit (SCR), which deploys ammonia gas NH3 to limit emissions of NO and NO2. A modern nitric acid plant needs to monitor the emissions of these gases.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Headworks Odor and Corrosion Control Using Hydrogen Peroxide

    Hydrogen Peroxide typically controls odors and corrosion at treatment plant headworks by direct oxidation of hydrogen sulfide (H2S) within the wastewater. In the direct oxidation mode, H2O2 is applied to the wastewater 5-30 minutes prior to the point where the odors are being released, generally as the wastewater line enters the plant boundary. The efficiency of hydrogen peroxide treatment depends upon the available reaction time, the level of iron in the wastewater (reaction catalyst), wastewater pH and temperature, and the initial and target levels of H2S odor. Under optimal conditions, effective dose ratios are 1.2 - 1.5 parts H2O2 per part dissolved sulfide, and can be reliably estimated through beaker tests. H2O2 + H2S → S0 + 2H2O Frequently, control of odors through the primary clarifiers is wanted. In such case, the mechanism of control is both direct oxidation of H2S (as it rises from the solids blanket), and prevention of odor generation (by supplying dissolved oxygen). Control is typically achieved with a booster dose of 1-2 mg/L H2O2 added to the clarifier influent. Higher doses or alternate modes of addition may be required in cases where: 1) hydraulic retention times are > 2-3 hours; 2) solids blanket depths are > 1-2 feet; 3) soluble BOD levels are > 200-300 mg/L; or 4) waste activated sludge is co-settled with the primary solids. 2H2O2 → O2 + 2H2O

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Computerized instrumentation for the medical gas flow and scientific research

    Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can generate the specific reduced oxygen environments needed for anerobes as well as the enriched oxygen environments needed in a variety of cellular, viral and high density culture applications. Systems can also be used to create a specific and stable gaseous environment in a clean room. In all cases, the Environics Atmosphere Mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of a high number of expensive blended cylinders.

    By Environics, Inc. based in Tolland, CONNECTICUT (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you