Ozone is a highly effective method for bacteriological treatment and useful in a variety of everyday situations from removing odor to ensuring clean, high quality drinking water from the tap. But O3 is more than just effective. It is also environmentally safe, which makes it highly suitable for treating water in enormous quantities; both drinking water and industrial waste water, i.e. in industrial slaughterhouses.
Demand for oxygen generators in the medical field is growing rapidly. Stricter international medical regulations is also putting a tougher demand on oxygen plants for flow, pressure and purity monitoring.
Twice the output of air-fed systems . . . As customers demand more ozone for less capital investment, oxygen is quickly replacing air as the industry’s preferred feed gas. Ozone output normally doubles when 93% oxygen is fed into the corona discharge.
With Oxygen Generating Systems Intl. (OGSI)’s oxygen generating systems, care providers are assured that in the event of a disaster their oxygen supply chain will not be in jeopardy. By filling cylinders at your site, the uncertainty and logistics of delivered oxygen supplies are eliminated.
OGSI has products to assist you in times of: Natural Disaster / Accidental Emergencies
Terrorism / Epidemic Outbreak / Chemical / Biological Disaster
Using Oxygen to Solve Waste Water Problems
Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to:
* Reduce nitrogen levels
* Meet peak O2 demands
* Have a back up to your aeration system
* Pre-purify waste water
* Control odors
* Deter corrosion damage
* Meet increased requirements regarding waste water purification
Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue.
There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.
Whether you’re welding stainless steel, carbon steels, titanium, or aluminum, you need a high quality weld with a small heat-affected zone as well as high cooling and heating rates, and that’s where our laser welding nitrogen generator comes in. At Gas Control Systems, we’ve got the right nitrogen generator for you. Maintaining the proper weld temperature is important when you need to join multiple pieces of metal. At Gas Control Systems, we can provide you with the right laser welding nitrogen...
The irrigation with ozonized water systems consists on providing a greater amount of oxygen to the root arriving free of virus, bacteria, fungi, seaweed, spores and any other microorganism, reason why it is obtained a faster growth than the habitual one, with more aliveness and force as well as more productivity. This system is very beneficial for the irrigation, such as fruit trees, vineyards, and cultures in general obtaining the prevention of diseases in the plants. Ozone has an oxidizing power greater than...
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control system.
When dealing with food, oxygen is the enemy. It causes food to loose its freshness and even make it parish. Bacteria loves oxygen and when combined with food, it doesn’t take long before the food becomes inedible. That’s where our food packaging nitrogen solution at Gas Control Systems can help. Increase your products shelf life and quality with a nitrogen generator from GCS
POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance
When you need gas blanketing or tank padding for your storage tanks and containers, our team at Gas Control Systems can help. Our gas blanketing nitrogen generator offering can meet all of your needs. When it comes to gas blanketing, nitrogen is usually the best option. It can be used in a variety of situations including in tanks that are storing chemicals or hydrocarbons. The nitrogen will help reduce your oxygen content in your storage tanks or containers to a safe level.
Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can...
THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.
Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks....
Maintain healthier ponds, increase stocking densities, and generate higher yield with optimum oxygen transfer. Maintaining the proper level of oxygen dispersion in your systems is critical to the success of your operation – and the life of your fish. Poor dissolved oxygen levels, fluctuating water temperatures, and stratification all can negatively affect fish health and pond production.
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective...
Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment...
Ozone is an allotropic form of oxygen; each molecule contains three atoms of oxygen instead of the usual two. Ozone is a powerful disinfectant and has been used commercially for the treatment of potable water since 1904. It is produced on site in the same way that ozone is formed naturally, by the discharge of electricity during a thunderstorm. A high voltage is passed across a gas stream containing oxygen. This method of ozone generation is called corona discharge. The energy of the high voltage splits an...
The brewing process generally generates unique, high-strength waste water as a by-product. The waste water typically has a high concentration of Biological Oxygen Demand (BOD) form the carbohydrates and protein used in brewing beer. Brewery waste water usually has a temperature of > 25 °C.