oxygen monitoring Applications
-
PremiumGas monitoring and dust monitoring for the BOF (basic oxygen furnace)
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Monitoring of Dissolved Oxygen in Seas
By Franatech GmbH based in Lüneburg, GERMANY.
-
Monitoring of Dissolved Oxygen in Lakes
By Franatech GmbH based in Lüneburg, GERMANY.
-
Dissolved oxygen measuring for environmental monitoring agencies
By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).
-
Monitoring of Dissolved Oxygen in Rivers
By Franatech GmbH based in Lüneburg, GERMANY.
-
Premium
Oxygen monitoring from aerobic and anaerobic for biodegradation tests
Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
PremiumMarine monitoring solutions for the O2 oxygen monitoring
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control system.
By Opsis AB based in Furulund, SWEDEN.
-
PremiumProcess monitoring solutions for O2 oxygen monitoring
OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 oxygen monitor. The most suitable technique is used for the application at hand.
By Opsis AB based in Furulund, SWEDEN.
-
Premium
Oxygen monitoring from aerobic and anaerobic for toxicity test
Toxicity of pure chemicals is assessed using respirometers by adding increasing concentrations to an active culture. The concentration at which oxygen uptake or gas production begins to decrease is known as the “threshold toxicant concentration.”
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
Premium
Oxygen monitoring from aerobic and anaerobic for biomass activity tests
Pulse-Flow respirometers can be used to assess biomass activity for aerobic and anaerobic reactions. In aerobic tests, cultures are combined with nutrients, trace minerals, and an organic substrate – such as acetic acid or ethanol. The maximum oxygen uptake rate reflects the amount of active biomass in the test culture.
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
Premium
oxygen monitoring from aerobic and anaerobic for activated sludge respiration (ASR) tests
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
Premium
Oxygen Monitoring from Aerobic and Anaerobic for determination of biodegradation kinetics by respirometry
Intrinsic kinetic tests involve adding relatively high concentrations of organic substrate to small concentration of acclimated microorganisms so that the COD/VSS ratio typically is greater than 10. Kinetic parameters are then determined by non-linear modeling using well-known relationships between biological growth and oxygen uptake.
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
PremiumDissolved oxygen measurement for the wastewater industry
By WTW - a xylem brand based in Weilheim, GERMANY.
-
Premium
Oxygen Monitoring from Aerobic and Anaerobic for Short-Term BOD Measurements
By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).
-
Premium
Oceanographic Monitoring
For survey operations up to 6000m depth (and deeper by special request), Valeport offer instruments to measure and record the classic physical parameters of Temperature, Depth, Salinity, Density, Currents and Waves. Along with the most accurate Sound Velocity sensors in the world; the ability to interface other parameters / sensors such as pH, Dissolved Oxygen Turbidity, Flourometer, Transmissometer and PAR; Housings and deployment frames to suit in-line moorings, profiling and seabed deployments, Valeport can cater for all your oceanographic survey requirements.
By Valeport Ltd based in Totnes, UNITED KINGDOM.
-
Premium
Chemical Oxygen Demand (COD) that is Safe, Fast, Accurate and Green
By MANTECH based in Guelph, ONTARIO (CANADA).
-
Hydrogen Sulfide (H2S) monitoring
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Carbon Monoxide (CO) monitoring
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Premium
Gas monitoring and dust monitoring for the iron / steel industry
- Blast furnace offgas, combustion control, CO, CO2, O2
- Converter (Basic oxygen furnace BOF)
- CO gas recovery
- O2 measurement for explosion prevention
- Electric arc furnace offgas, combustion control, CO, O2, H2O
- Reheating furnaces, O2
- Coking plant
- CO analysis in oven offgas
- O2 analysis for explosion prevention in raw coke gas or after tar precipitator
- NH3 measurement after scrubber
- H2S measurement after scrubber
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Surface water quality testing for the environmental monitoring industry
Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.
By Aquaread Limited based in Broadstairs, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you