Only show results available in Virginia? Ok

particle analysis Applications

  • Premium

    Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Independent particle characterization services for medical devices industries

    Advances in biomedical implant and device technology continue to present new challenges in the area of physical testing. Particle Size Distribution, Surface Area and Porosity measurement data are invaluable to the biomedical researcher. PTL partners with each client to design projects that provide this needed information while controlling the costs of research. Applications have included particle size analysis of wear particles in fluid submitted from implant fatigue studies and pore size analysis of tricalcium phosphate granules compressed into bone grafting media. Evaluation by photomicroscopy and mercury porosimetry of artifical ligament materials have provided insight to researchers on their products.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for beauty / cosmetics industries

    PTL’s analytical staff has years of experience designing test methods and performing analysis for cosmetic, skin care, fragrance and personal cosmetics_particle_testinghygiene samples. Whether your company needs a third party verification, routine QC confirmation, stability studies or one time testing, PTL will create a project to meet your needs. Applications include the size and shape of cosmetic enhancers (glitter particles for example) in a final product, droplet size from spray nozzles/atomizers and particle size of emulsion particles comprising creams/lotions. In addition, the particle size of powdered cosmetics is of tremendous importance in how they flow, cover and can directly affect their appearance as well as the user’s skin.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for dietary supplements

    Concurrent with the U.S. Food and Drug Administration’s final rule establishing regulations to require current good manufacturing practices (cGMPs) for dietary supplements, PTL can offer cGMP services to all supplement manufacturers. PTL has sustained its FDA registration since 1994, which involves rigorous inspections by FDA every 2 years or sooner. According to the final rule, proper controls must be in place for dietary supplements to be produced in a consistent manner for identity, purity, strength, and composition. PTL’s particle characterization tests can be conducted following FDA regulations. Valuable testing such as particle size and shape, image analysis, B.E.T. surface area, pore volume and pore size can be analyzed under cGMP compliance. These analyses can give insight into absorption, strength, and composition of the material being processed.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for pharmaceutical industries

    Supporting drug development with pharmaceutical testing is some of the most exciting work we do. As a premier cGMP contract service laboratory, PTL partners with pharmaceutical scientists to identify key physical characteristics of pharmaceutical APIs and excipients ranging from powders, solids and liquids. With over a decade of experience testing a vast array of pharmaceutical products, PTL’s analytical staff uses custom-designed test methods for particle size, particle shape, surface area, pore volume, pore size, thermal analysis, powder flowability and zeta potential analyses.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Independent particle characterization services for abrasives industries

    Serving the abrasive industry over the last 2 decades, the most common testing performed for this field is particle size and shape analysis. The world of abrasives can encompass a host of varying materials from diamond dust, silicon and tungsten carbide, fused silica and quartz, to polished glass and medical abrasives. particle_size_of_abrasives With sizing instrumentation capable of measuring from a few nanometers up to 2000 microns and classic techniques such as sieving for even larger sizes, PTL has the expertise and equipment capable to measure any abrasive type and size. Particle size distribution analyses on abrasives provide valuable insight to engineers in several areas. For example, attrition products from classified spent abrasives can often be seen as a shift to smaller particle sizes.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Premium

    Gas analysis & monitoring system for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and above (ie billionths of a meter to half a millimeter).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the daughter nucleus (a different element, characterized by stability energy).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time.  The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and other substances.

    By Opsis AB based in Furulund, SWEDEN.

  • Surface Science

    SIMS - for depth profiling, surface composition measurement, and elemental imaging, Hiden's SIMS Workstation provides a complete analytical facility. RGA - The Hiden quadrupole mass spectrometers provide high sensitivity detection capability for the most demanding XHV/UHV vacuum environments. The pulse ion counting detector enables measurement of both positive and negative ions through 7 continuous decades, the integral accumulation mode being used for the capture of discreet particle events. UHV Temperature Programmed desorption studies (TPD) - Hiden Analytical’s 3F/PIC mass spectrometers with pulse ion counting detection are available configured specifically for UHVTPD providing fast, wide dynamic range detection of multiple species, capturing the entire desorption event. The Hiden IDP ion desorption probe is a quadrupole mass spectrometer configured for analysis of low energy ions in electron and photon stimulated desorption studies.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you