Only show results available in Virginia? Ok

particle monitoring Applications

  • Premium

    Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Aerosol and particle technology for pressure & temperature industries

    The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Aerosol and particle technology for aerosol generation industry

    For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and overpressure up to 10 bar.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Aerosol and particle technology for filter testing industry

    Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great success.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge are monitored in many industry sectors and PTL testing provides valuable supporting data in this monitoring process.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Haze Monitoring

    The principle cause of regional and urban haze, or visibility impairment, is light extinction caused by fine particles, sulfates, organic and elemental carbon, nitrates and crustal matter. Particles between 0.1 and one micrometers in size are most effective at scattering light, in addition to being of greatest concern for human health.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Air quality monitoring

    To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • SONARtrac - Dredging - Hopper Vessels

    Soil density, hardness, lithology, and sediment particle size distribution can create slurry of variable makeup and density. At a constant pump speed, the slurry will have a variable flow velocity, which is undesirable and potentially dangerous. If the velocity is too low, there is a risk of sand outs in the pipeline. If the velocity is too high, the pump will wear and be inefficient. Traditional velocity flow meters with wetted parts are prone to wear, causing measurement inaccuracies, and require frequent, costly replacements. In addition, the presence of entrained gases may disturb the readings of traditional flowmeters and cause slurry density measurements to be inaccurate.

    By CiDRA based in Wallingford, CONNECTICUT (USA).

  • Premium

    Laboratory Weighing - Filter Weighing

    Traffic means mobility and air emissions. Thanks to economical advantages, diesel engine becomes more and more popular, but particle emission is strictly restricted by regulations. Determining the weight of particulate matter (PM) is a key task in the automotive industry and one which is likely to become even more important as emissions standards become stricter. To allow fast and easy measurement of particulate matter at any time, METTLER TOLEDO has developed new filter weighing solutions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Air quality monitoring for traffic

    Modern intelligent traffic systems are designed to move traffic in an efficient manner as well as reduce the environmental impact of traffic on nearby populations. This includes the effects of noise, particle pollution and gases.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time.  The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and other substances.

    By Opsis AB based in Furulund, SWEDEN.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Air Quality Monitoring for the Aerosol Sampling Industry

    MSP’s aerosol instrument products include cascade impactors, virtual-impactor concentrators, personal PM samplers, micro-environmental PM Samplers, condensation particle counters, an asbestos fiber monitor, aerosol generators, electrical ionizers, differential mobility analyzers, laser particle counters and wide range particle spectrometers.

    By MSP Corporation based in Shoreview, MINNESOTA (USA).

  • Premium

    Gas analysis & monitoring system for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and above (ie billionths of a meter to half a millimeter).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the daughter nucleus (a different element, characterized by stability energy).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Dust monitoring of exhaust gases from manufacturing processes

    DynOptic dust monitors use the innovative Dynamic Detection Principle (DDP) to measure dust and particulate within exhaust gases from various manufacturing processes. DDP, or optical scintillation as it sometimes referred to, measures the dynamic fluctuation in light transmission as dust particles move through a light beam. This dynamic fluctuation derives from temporal distributions of the dust particles which attenuate the light beam. The more dust present in the exhaust, the greater the amplitude of these fluctuations. DDP instruments calculate the dynamic response, or the ratio of light variation to light intensity, which for particular applications, is proportional to dust concentration and when calibrated against standard reference measurements, this can be presented as a reading in mg/m³.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest

    It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle phase. The current number is that, on a global scale, SOA would represent around 60% of the overall OA.3 However, recent global mass-balance estimations for the removal of volatile organic compounds (VOC) suggest that this number could under-predicts SOA production.4 Recent field measurements in urban locations are also in support of a larger share, indicating that SOA is the dominant fraction of OA, with amounts considerably 20 greater than models predictions.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Smoke generator device for PPV & impulse ventilation testing

    When water-based artificial smoke is introduced into a rapidly moving air stream, the particles that make up the artificial smoke evaporate much more quickly than they do in a static environment. So if you are looking to produce an artificial smoke that better represents the smoke created by a real fire, we would always recommend the ViCount smoke generator, the smoke from which is virtually unaffected by fast moving air streams. Used world wide PPV training centre`s and to test impulse ventilation systems. A Home Office report into PPV (Positive pressure Ventilation) by the Head of the Fire Experimental Unit, Fire Research & Development concluded that the concept behind the technique of PPV was relatively easy to understand and the equipment simple to operate, but stressed the need for extensive training.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you