Only show results available in Virginia? Ok

particle monitoring system Applications

  • Premium

    Aerosol and particle technology for aerosol generation industry

    For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and overpressure up to 10 bar.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge are monitored in many industry sectors and PTL testing provides valuable supporting data in this monitoring process.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and above (ie billionths of a meter to half a millimeter).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the daughter nucleus (a different element, characterized by stability energy).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Air quality monitoring for traffic

    Modern intelligent traffic systems are designed to move traffic in an efficient manner as well as reduce the environmental impact of traffic on nearby populations. This includes the effects of noise, particle pollution and gases.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Smoke generator device for PPV & impulse ventilation testing

    When water-based artificial smoke is introduced into a rapidly moving air stream, the particles that make up the artificial smoke evaporate much more quickly than they do in a static environment. So if you are looking to produce an artificial smoke that better represents the smoke created by a real fire, we would always recommend the ViCount smoke generator, the smoke from which is virtually unaffected by fast moving air streams. Used world wide PPV training centre`s and to test impulse ventilation systems. A Home Office report into PPV (Positive pressure Ventilation) by the Head of the Fire Experimental Unit, Fire Research & Development concluded that the concept behind the technique of PPV was relatively easy to understand and the equipment simple to operate, but stressed the need for extensive training.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you